vogel9361

See my previous post above Using all the above information, I have fitted a variable boot floor to 2019 Kamiq SE L, using the first four items on the above list for just under £220.00 The boot trims are new carpeted panels with the cut out holes for the flip up lashing eyes, which you can see in the above pictures of a factory fitted kit. Later Kamiq's may have both holes in the wheel arches, but mine has only the front ones and they do the job quite adequately, the only downside is that you cannot use the lashing eyes, unless you remove the floor.. If you get the parts, put the front fittings in place and use a small tool. such as a bradawl to locate the wheel arch threaded holes, fit the front bolts and the do the same for the rear bolts. As I said before above, my Kamiq only has the front threaded holes, but later models may have all four, as Skoda seem to listen to owners suggestions/complaints and either retrofit or adjust during factory assembly As an example, the A/C controls on mine are via the touch screen, but the latest models have gone back to knobs/dials due to owners complaints etc.

I have never used this site for selling, so do i require "Freedom lite" or "Freedom" to sell anything?

I realise that this an old thread and may not see the light of day to others, but just in case I thought I would share my recent experience re, my 2019 Kamiq SE L boot floor. I bought the side fixings, the floor and four bolts as per previous message part numbers. The first female fixing to locate was the front one of the two and this was successful, but there is no female thread in the body work for the rear fixing and if there is, then it lies in another location close by. I have widened the hole to 30mm all round to accommodate the bulge in the bracket housing for the second bolt to put my finger in, but there is no female threaded area within the range of my fingers. Having said that the bracket is quite firm and is not loose with only one bolt, so I will have to live with it. A little bit of carpet trimming and I am quite pleased with it. As an aside, am going to try and navigate my way to the For Sale" section, as I now have a Yeti Spare wheel kit surplus to requirements, Anybody interested? If so, contact 01225 703245 or *****@*****.tld