claudiu2s

Whereabouts are u? I can help reading the eeprom and save all the lights configuration (byte 18) and then upload it into the new one.

How much posted to HP3 0gb?

Why it needs CP removiyif is fully hacked?

It doesn’t have DRL. Scandinavian drl option is using the main beam as DRL, so all lights will be on when this is coded in.

It should be possible if u set DRL as Scandinavian mode in 09 Central electronics. If local to Hemel Hempstead i can code that in for u

Have u got a picture with the back please?

If you have MFD u can find the option in there, if not you will need VCDS to code it

May i have rcd330?

U need to scan it and see what faults it stored but looks that ‘component protection’ kicked in for whatever reason

Your location would help

You need to go to 19 Can Getaway/Instalation list, in there you need to look for 37 Navigation and tick it.

If you are lucky is only missing it’s calibration and that can be sorted by calibrating it. If is defective then you need a new sensor. A vcds scan will tell you exactly what the issue is and it can perform basic settings in case calibration is out.

If you ever are around Hemel Hempstead i can help you with a scan.

I haven’t received it mate. Drop me an email [email protected]

I am in Hemel Hempstead and can try and help u if you come to me.

Second fog can’t be coded with VCDS. Is VCP job by editing the EEPROM in the BCM.

Can u please Pm me with best price for mirrors and mirror switch. thank you

Hey mate, i can help if you come to me in Hemel Hempstead (HP3 0GB).

The injector needs to be coded in. You have to put the number stamped on it into VCDS. I don’t think it will pick that by itself. I presume at the moment is runnig with the number from old injector.

If not to far i am in Hemel Hempstead

This will work inly if your car is Mk3 MQB platform Enabling passenger mirror dip on selecting reverse Tested on Elegance, vRS & SE Controller 52 - Passenger Door 07 - Coding Byte 4 Enable Bit 2 Enable Bit 3 Controller 09 - Central Electronics 16 - Security Access - enter 31347 10 - Adaptation (15)-Access control 2-Spiegelabsenkung bei Rueckwaertsfahrt - change to active This setting enables a menu item in Infotainment (20)-Access control 2-Menuesteuerung Spiegelabsenkung - change to active Remember, the mirror switch needs to have the passenger mirror selected for this to work, and the mirror only dips a fixed amount if you don't have memory seats

Are you brake lights on without pressing the brake pedal?

Can you check the resistance of the glow plugs with VCDS or is it a multimeters job?

Hi, After you replace the injector you need VCDS to code it in. In the injector head you have a number which needs to be typed into engine/security access or login/adaptation on the injector you're changing .

Scan it with VCDS and see what faults it brings and then take it from there.