Jump to content

parkys100

Finding my way
  • Posts

    14
  • Joined

  • Last visited

Profile Information

  • Location
    Southampton

Car Info

  • Model
    Octavia VRS 230 Combi

Recent Profile Visitors

336 profile views

parkys100's Achievements

Apprentice

Apprentice (3/17)

  • First Post
  • Collaborator
  • Reacting Well
  • Conversation Starter
  • Week One Done

Recent Badges

0

Reputation

  1. Hello just had a tree branch fall on my tailgate and crack the rear tailgate /roof spoiler.I have learned they are glued in place.Has anybody had any experience on removing without causing more damage to the paint . Are there any small fixings hidden away?Any points gladly accepted .
  2. Hello car is coming upto 3 yrs and suggestion that the electronic differential unit require a fluid change ?On certain gearboxes a filter change is also required. Does any person have experience with this please what fluid ?Is a filter present on the 6 speed manual 2wheel drive? Rgds Allan
  3. Hello Did some research myself,and contacted Westfalia UK and they seem to know about this issue when installing a 7pin setup with one of there dedicated wiring kits.If you install a 13 pin all will be good.So there you have it installed the dedicated kit and have built in design fault?
  4. Hello Just to add on Electrics 1 69 trailer byte 3 I have selected both terminal 30 output pin active and non active and it makes no difference? the options on byte 1 are 00 partial network operation active and the other option non active .bit 4>7 On the write up I have byte 1 bit 0>7 01 trailer connector diagnosis active ? Is the choice. So this may or mat not be the problem?2016 VRS 230 Any experts out there please.
  5. Hello I have just fitted a towbar and used my new VCDS to program the features,The trailer board all works ok ,reverse sensors bypassed when trailer on all good.But I have an error on module 69 trailer error reads P1577 00 [009] open circuit. On the programming side on electrics 1 69 trailer long code helper Byte 1 I did not have the option trailer connector diagnosis active. On byte 3 I did have 00 terminal 30 output [pin 9] not active.Any ideas what I am doing wrong,any help much appreciated.
  6. Hello I have just fitted a witter towbar and have purchased the VCDS software is there any person in the Southampton/Portsmouth area who can show me the good and bad of VCDS? Rgds Allan
  7. Hello Thanks for the replies,do have suggestions on aftermarket alloys that fit over the callipers. Or is it just suck it and see. Thank you Allan.
  8. Hello I want to fit some winter boots on my VRS 230 and was informed the mark 2 Skoda Neptune alloys In 18 inch will not be compatible?They have the correct PCD offset (51mm) ? Is this just a stock answer and has somebody fitted these for winter wheels to a mark 3 VRS Octavia. Thank you in advance.
  9. Hello I will be very interested in this thread,looking forward to the outcome .
  10. Hello Thank you ,I just need some of those circuit extender fuse holders. Rgds Allan
  11. Hello I have just discovered the 12v accessory socket is permantly live,I have now want to splice into the fuse box in behind the glove box to find switched live for a dash cam supply? Has anybody achieved this?Sorry for lots of questions ,thank you in advance. Rgds Allan
  12. Just a quick note if this has been done before on a Combi model with Canton boot speaker (how the hell is that removed).Looks like a long drawn out job?Any help would be most welcome. Rgds Allan
  13. Just joined after picking up Octavia VRS 230 Combi ,next job is to hardwire dash cam and fit a tow bar. Looking forward to like minded drivers. Rgds Allan
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.