Jump to content

zejdkoco1

Finding my way
  • Posts

    22
  • Joined

  • Last visited

Profile Information

  • Location
    Bosnia and Herzegovina

Car Info

  • Model
    Skoda Octavia 2002

zejdkoco1's Achievements

Apprentice

Apprentice (3/17)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

3

Reputation

  1. Hello, I am aware that the A/C compressor wont kick on when the outside temperature is bellow 5 degrees celsius. I find that rather odd as I often need to defrost the windows, and without the AC it takes much longer. Can someone explain to me why is it like that? Why cant I run the compressor on cold temperatures? Is there any way to bypass this, and turn on the compressor? Thanks in advance.
  2. I did adjust the linkages, the only way I could do it without lifting the car and that is by undoing those plastic retainer clips on the gearbox itself, putting the gear lever in the locking position, locking the moving arm thing on top of the gearbox, then snapping the retainers back. Are you suggesting checking out the linkages that come out of the gear stick?
  3. The clutch is old, as the car has 230K kilometers on the clock and we have it since it had 90K and didn't do the clutch, but it works fine, no slip no unusual behavior, other than that one time the pedal fell to the floor, but since then the car behaves just as before.
  4. Hi, I have a 5 spd manual gearbox in my mk1 Octavia, and I started to notice that sometimes when shifting gears, if I do it slightly faster (under 1-2 seconds) the lever hesitates to go int gear half way in, then I need to push it harder to engage. There are no grinding noises, I felt this with my 1st gear, reverse is even harder a little bit, but since yesterday I am noticing it with 3rd. I am suspecting synchro wear. I adjusted the linkages on the gearbox but it's still the same. I am thinking on changing the gearbox oil but I'm not sure how this would help. The problem is less noticeable when I first start driving, bud when the car gets hot it becomes more notchy and hesitant. It isn't undrivable by any means but it lowkey bothers me. Also a few days ago the clutch pedal was stuck down, maybe 1/3 way from bottom, I had to pull it back up by hand and the car was fine afterwards, this was the first time it happened. I read somewhere that maybe the clutch isnt disengaging all the way, but given that the problem is with 1st, reverse and now 3rd gear I presume all gears would have this problem if it was cause of the clutch? so here are my suspects: 1. Failing synchros 2. Old gearbox oil 3. Problems with the clutch, air in the system maybe? worn clutch material? If you could help me diagnose this I would be thankful.
  5. Ok thanks for the exact serial number on part, because i managed to find much cheaper ones on aliexpress (like 5€). The ebay listing is more expensive than a used instrument cluster.
  6. Okay so I will definitely look into the stepper replacement. Are all the motors the same? for Tachometer, Speedo, fuel and temp guage? Or do I specifically need the stepper motor for tachometer?
  7. I have a 2002 Octavia mk1 2.0 Petrol and the clutch is flush with the brake pedal. It has a really long travel, it is super light and bites somewhere in the middle.
  8. My 2002 Octavia had a similar issue, locks would randomly stop working, windows as well, and the puddle light. Turns out a brown wire that is slightly thicker than the others (presumably the earth) had cracked and split where the door meets the car, i guess from fatigue. So check your wiring and continuity.
  9. Hi all, my tachometer needle isn't working. It doesn't even move, i can rotate the needle (with cover off) while the engine is running and feel no resistance from the servo. Everything else works, gauges, warning lights etc. There is a tach signal from engine because i can read it with an OBD-II Bluetooth app. I'm pretty sure the servo is dead, tried disconnecting and reconnecting the cluster it still doesn't work. I was wondering if a servo replacement is easier than changing the whole cluster since I'm not sure about the immobilizer and also how to keep the mileage of the car. I don't know how to reprogram it. Is it plug and play, or is it more technical and would require me to go to a mechanic?
  10. Hi guys, if someone finds this thread, I have found the cause of the beeping and feel kinda stupid. I have an LPG conversion on the car and the little module inside the car was beeping to inform me to change the LPG fuel filter. It has nothing to do with the car itself. I guess you learn on your own mistakes. There is no way you will experience this unless you have the exact LPG kit.
  11. Yeah, I've been trying to fix the tach but it appears the needle mechanism (servo motor) is dead, and it isn't worth the fuss and money. You can always listen to the engine :P
  12. Hello, for everyone wondering, here is an example I shot today.
  13. Well the battery is fairly new, the car starts fast (not the usual slow startup when battery is low). Even after running a while, when the battery is charged it still beeps. I can check the voltage with a multimeter, but I don't think its the battery.
  14. Um no, the LCD displays stay the same. I had a "Service" warning flashing but I cleared it so there is nothing now.
  15. Hello, I have this strange problem that started happening a few days ago. I drive a Skoda Octavia mk1 2.0 Petrol from 2002. Every time I turn the engine off (no matter if it's warm or cold) I hear 3 beeps from the dash, no lights from the instrument cluster, and it doesn't beep when I start the engine. I get the usual lights on the cluster when I turn the car on then they go away. I tried turning the radio off to see if it comes from there and that is not the case. Leaving headlights on or off doesn't make any difference. The beeps are quick and always 3 beeps. It is a different tone than when you leave lights on and remove the key. Also when I turn the key to ACC and power and back to off it doesn't beep. Only when the engine is started and turned off. If I leave the key in the lock after turning the engine off it still beeps. I just want to know if its something important and critical. Thanks in advance.
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.