Scoptus

Fixed! I just leave the car off for a few hour and now everything work like a charm

Hi Guys! Done my retrofit today. I have a problem: the light are working, they turn on when i open and close my doors and when i unlock the car, when i turn on the headlight the footwell light are dimmed at the rate that i set in VCDS. The infotaiment menu has the footwell light option with the light percentage but when i click it it say "FUNZIONE ATTUALMENTE NON DISPONIBILE" in english is more or less "FUNCTION NOT DISPONIBLE AT THE MOMENT" any suggestion? Thanks

Hi get this message, what can i do? can't code the Hill Holder Sorry i have not much vcds experience

Do you know if it is possibile to activate HILL HOLDER on octavia III with VCDS? Thank you very much

Ok i fixed the problem: i had to codify tg 10 park assist <> coding 07 <> byte 2 to REARVIEW CAMERA INSTALLED than codify the rearview camera in stg 5f than everything worked well! I've done a test whit a camera and it works great!! I still waiting for the right one to come to finish the install. I0ve bought a license plate light camera i'll do the work as soon as i get it!

Hi guys! New to the forum! I have bought a good used combi octavia 3 from 2014 with amundsen nav and bluetooth (only 29.000 km official skoda car!). My car name is SKROFA just change a letter on the original brand name. For non italia speaker SCROFA in italian is the female pig! In fact my car's mascotte is a little pig! Hi guys! New to the forum! I have bought a good used combi octavia 3 from 2014 with amundsen nav and bluetooth (only 29.000 km official skoda car!).

I apologize for the double post, I STILL NOT A HAVE A CAMERA INSTALLED i was just doing it to see if it will work with my system!

Hi guys! New to the forum! I have bought a good used combi octavia 3 from 2014 with amundsen nav and bluetooth (only 29.000 km official skoda car!). I have update the amundsen firmware to 475 and everything is ok. I'm tryng to code the camera but i have a problem: I have 16.8 VAG cable and software, i go 5f then long conding, then select the bit 19 and thick "REAR VIEW CAMERA " it dosen't show the bit as stated in the guide!! If i click to activate REARVIEW CAMERA i get error ERROR 31: REQUEST OUT OF RANGE Any idea?