fl0riz

Hi everyone, I read some things in this thread about the 'audi throttle setting' with the 1.4 DSG. I am experiencing issues as well with my S3 combi 1.4 DSG. For a couple of times already, my cruise control (I don't have ACC) failed during driving. Sometimes it failed while it was on, and sometimes it wouldn't even start. I've checked the logs via VCDS, and I see that this error is logged: Address 01: Engine (J623-CZEA) Labels: 04E-907-309-V1.clb Part No SW: 04E 906 027 BT HW: 04E 907 309 AB Component: R4 1.4l TFS H23 9177 Revision: R9H23--- Coding: 0225003223241D087000 Shop #: WSC 12345 123 12345 ASAM Dataset: EV_ECM14TFS01104E906027BT 001011 ROD: EV_ECM14TFS01104E906027BT.rod VCID: 77FA309ECE5604F9D8-8022 CAN Converter 01: 1 Fault Found: 17150 - Databus U1122 00 [032] - Implausible Message Intermittent - Not Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 6 Mileage: 2508 km Date: 2017.03.27 Time: 14:50:11 Engine speed: 2246.50 /min Normed load value: 9.4 % Vehicle speed: 123 km/h Coolant temperature: 95 °C Intake air temperature: 42 °C Ambient air pressure: 1010 mbar Voltage terminal 30: 13.735 V Unlearning counter according OBD: 40 Acceleration: -0.304 m/s² Cruise Control System (CCS): status-Bit 0: 3 Drivetrain coordinator: ACC fault status-Bit 0: 0 Drivetrain coordinator: ACC fault status-Bit 8: 0 Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 0: 0 Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 16: 0 Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 24: 0 Drivetrain coord: cause of shutdown in cruise cntr and ACC mode-Bit 8: 0 Drivetrain coordinator: brake fault status-Bit 0: 32 Accelerator pedal travel: 0.00 % Readiness: 0000 0000 Does anyone experienced the same? When the car is completely shut down and started again, it all works fine again (until the error hits again). What I also found in the logs, is this strange error on my ABS: Address 03: ABS Brakes (J104) Labels: None Part No SW: 5Q0 614 517 CG HW: 5Q0 614 517 AG Component: ESC H62 0643 Revision: 00000000 Serial number: 60257000001675 Coding: 1E076A9C34222374477B060040CA4978562CC4E2600292753021F0F8C282420000000012121212B835351919323200 Shop #: WSC 33361 790 00165 ASAM Dataset: EV_Brake1UDSContiMK100IPB 036010 ROD: EV_Brake1UDSContiMK100IPB_035_SK37.rod VCID: 78F833A2C3480B81D1-802C 1 Fault Found: 8314 - Check Coding of ECUs on Powertrain Data Bus P1647 00 [009] - - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 3 Fault Frequency: 86 Reset counter: 108 Mileage: 2337 km Date: 2017.03.24 Time: 19:11:25 Again, no clue what this is. I don't think there is a real issue with my ABS (I also don't get a warning signal for this). Any help is highly appreciated!!