Manoj1135

Did you solve the issue ? If your stereo is connected to BCM then it should fetch time from the BCM, not from Stereo. There 2 brands of RCD330Gplus.. Noname and Desay Noname based on linux Desay based on wince

I feel some VCDS coding is required not sure though, Also pin 20 and 21 were for PQ25 series BCM. I'm not sure same pins used in 6RO 937 087R, contact this guy from pune Nikhil(+91 8412053484) he's the champ..

Have you upgraded gateway ? Checked pin configurations ?

Has anyone tweaked the firmware ? What tools you guys used ? Like simulating entire system or so?

Awesome... Congratulations..

Hi VictorCZ I'm not sure whether Xiaomi supports mirrorlink. You can check the compatibility http://www.mirrorlink.com/phones Your phone should support VNC protocol.

I don't know about the behaviour with the Desay version of RCD330g Plus. As i wanted CarPlay functionality, i went for Noname version. Yes Exactly. If you have Auto Climate Control then you can easily tap radio CAN wires with Auto Climate Control. No need to reach till BCM

Hello Terence78, Yes it can be done. Mine, i replaced RCN 320 with RCD330g plus. Everything works perfectly, Steering controls works fine. Exisitng can connection on the iso didnt work for me. I had to connect CAN from ISO quadlock to BCM I would suggest to know your BCM pinout config before doing anything. As Aromal faced issue in connecting Mine is having Indian made components. Car model : Ambition Year : 2014 MFD: Green, MFSW : Yes

Hi Aromal, Sorry for the delayed response. Could you please share me the pic of BCM ? also pic of BCM part number.

Mine was pq 25 series bcm

Mine is Noname as i wanted carplay functionality. https://www.aliexpress.com/item/DHL-Free-Shipping-CD-Player-Car-Radio-Stereo-RCD510-Code-USB-AUX-MP3-For-VW-Golf/32764486995.html?spm=2114.13010608.0.0.43k2wK

OMG short circuit ? there is guy called Nikhil from pune He might help you in detail. Let me check with him and share his detail with you

I have tried Carplay in my Skoda rapid 2014 fitted with RCD 330g plus Everything works perfect except maps. Currently apple is not supporting navigation for CarPlay in india

You need to open notch from top (where the wire enters harness) you can see one notch on either side just pull them together to take connector out

Do you need pin details? I have already shared in my previous post. You can refer C - 73-pin connector -T73b- , white

Hi aromal Only quadlock is enough for the connection. Simulator you don't need. This is complete DIY. do it with care. As precaution you can disconnect battery. 1. Locate your BCM Under steering wheel you can find BCM (pic 1) 2. You need to work on the white one Press the harness lock and lift black lock. Detach from BCM 3. Now open the notch of white cap and pull out the harness (be gentle while removing) 4. Now connect 2 cables from ISO -Quadlock to the harness at pin 20(+) and 21(-) Hope you can identify + and - in the two cables (one with black lining is -ive ) Refer 2nd pic from my previous post. (These cable pins are one time push so make sure you are plugging in appropriate slots. Also consider your cables path from where you can pass through) Now plug back everything and you can use the radio. Bluetooth will work MFSW controls will work

You dont need simulator

Yes Sandesh RCD330g plus can be installed on Skoda Rapid. I've done for mine. Simple steps 1. You need RCD330g plus HU Quadlock ISO connector (without simulator) 2. Plug in Quadlock to HU and other Balck and Red harnesses. 3. You will be left out with 2 long cables from the IS) - quadlock. These 2 should be connected to your BCM pin 20(can+) 21(can-) in PQ25 series BCM A - Onboard supply control unit -J519- , low-lineB - 73-pin connector -T73a- black1 - Not assigned2 - Left dipped beam output signal3 - Not assigned4 - Interior lighting out put signal, door contact switch5 - Not assigned6 - Rear fog lamp output signal7 - Fog light switch input signal8 - Not assigned9 - Not assigned10 - Rear lid release motor output signal11 - Central locking motor "lock" output signal for all doors12 - Central locking motor output signal for driver's door13 - Central locking motor "Safe" output signal for all doors14 - Central locking earth input signal (31)15 - Central locking motor output signal for front passenger door and rear doors16 - Central locking supply input signal (30)17 - Central locking lock unit input signal for rear left door18 - Central locking lock unit input signal for rear right door19 - Driver side door contact switch input signal20 - Front passenger side door contact switch input signal21 - Central locking lock unit input signal for front passenger door22 - Central locking lock unit input signal for driver's door23 - Rear lid handle release button input signal24 - Central locking input signal, driver door25 - Interior locking button input signal26 - Door contact switch input signal for rear right door27 - Bonnet contact switch -F266- bonnet contact switch input signal28 - Hazard warning lights button -E229- hazard warning lights button input signal29 - Horn plate input signal30 - Rear lid lock position 2 input signal31 - Rear lid lock position 1 input signal32 - Right turn signal switch input signal33 - Left turn signal switch input signal34 - Door contact switch input signal for rear left door35 - Not assigned36 - Switch-off signal for heated seat37 - Not assigned38 - Driver side heated exterior mirror -Z4- , front passenger side heated exterior mirror -Z5- heated exterior mirrors output signal39 - Earth input signal (31)40 - Rear right side light bulb output signal41 - Rear left side light bulb output signal42 - Supply input signal (86s) for ignition/starter switch43 - Brake pedal position sender input signal44 - Supply input signal (15) for ignition/starter switch45 - Side light switch input signal46 - Not assigned47 - Not assigned48 - Not assigned49 - Headlight washer system relay output signal50 - Not assigned51 - Not assigned52 - Fuel supply relay output signal53 - Alarm horn relay -J641-54 - Supply input signal (75a) for ignition/starter switch55 - Starter inhibitor relay output signal (only models with automatic gearbox)56 - Hazard warning light button -E229- hazard warning light system warning lamp output signal57 - Interior monitoring "off" warning lamp output signal58 - Central locking SAFE function warning lamp output signal59 - Interior locking warning lamp output signal60 - Heated rear window warning lamp output signal61 - Not assigned62 - Main beam output signal63 - Supply input signal (30), left headlight64 - Supply input signal (30), heated exterior mirrors65 - Supply input signal (30), interior lights66 - Supply input signal (30), interior lights67 - Not assigned68 - Supply input signal (30), window wiper69 - Window wiper position 1 output signal70 - Window wiper earth input signal71 - Window wiper position 2 output signal72 - Horn output signal73 - Horn supply input signal (30)C - 73-pin connector -T73b- , whiteConnector assignment:73-pin connector -T73b- black -C-A - Onboard supply control unit -J519- , low-lineB - 73-pin connector -T73a- blackC - 73-pin connector -T73b- , white1 - Not assigned2 - Right dip beam output signal3 - Not assigned4 - Not assigned5 - Not assigned6 - Not assigned7 - Not assigned8 - Not assigned9 - Left fog light bulb output signal10 - Right fog light bulb output signal11 - Fog light bulb supply input signal (30)12 - Reversing light output signal (only models with automatic gearbox)13 - Turn signal and brake light supply input signal (30)14 - Left turn signal output signal15 - Right turn signal output signal16 - Brake lights output signal17 - LIN bus, door control unit and switches in steering wheel18 - Powertrain CAN, low19 - Powertrain CAN, high20 - Convenience CAN, high21 - Convenience CAN, low22 - Diagnosis CAN, low23 - Diagnosis CAN, high24 - LIN bus, sliding sunroof adjustment control unit, rain and light detector sensor, interior monitoring sensor,25 - Not assigned26 - Not assigned27 - Window wiper position 1 input signal28 - Central locking input signal, front passenger door29 - Not assigned30 - Interior monitoring deactivation switch input signal31 - Heated rear window button input signal32 - Wiper limit switch input signal33 - Not assigned34 - Switch and Instrument Illumination (58d) Output Signal35 - Not assigned36 - LIN bus, alarm horn37 - Signal (K), diagnosis38 - Earth input signal (31) for electronics39 - Supply input signal (30) for electronics40 - Not assigned41 - Not assigned42 - Brake contact switch input signal43 - Not assigned44 - Cruise control system "Set" input signal45 - Cruise control system "On/Off" input signal46 - Cruise control system "Reset" input signal47 - Cruise control system "Cancel" input signal48 - Reversing light switch input signal49 - Signal (L) alternator50 - Starter relay input signal51 - Supply input signal (75a) for ignition/starter switch52 - Window washer pump supply input signal53 - Window wiper position 2 input signal54 - Not assigned55 - Starter inhibitor signal (only models with automatic gearbox)56 - Not assigned57 - Not assigned58 - Heated exterior mirror switch input signal59 - Input signal for reference voltage (30)60 - Input signal for earth - reference voltage (31)61 - Washer pump motor and rear window wiper motor output signal62 - Windscreen wiper intermittent operation input signal63 - Heated rear window output signal64 - Not assigned65 - Not assigned66 - Not assigned67 - Heated rear window supply input signal (30)68 - Supply input signal (30), right headlight69 - Not assigned70 - Not assigned71 - Not assigned72 - Not assigned73 - Not assigned That's all.. you head unit functions very wel. Even steering controls will work as before