aromal

Finally i have installed the rcd330 plus after tapping CAN from ACC. Here is the pic.

Hi Manoj , Any guide on how to tap wires from ACC ? I am not able to figure out which panel to remove or how to access them without removing it.

I have got the Noname version with green back lit.

Here is the Pic of BCM and Connector assignments. Hope you can read it.

I have opened the BCM connector and to my surprise i found 20 and 21 Pin are already connected with Orange wires. Now wondering what is the solution now?

BCM connection did not work out and finally my BCM got short circuit. . The car is in Skoda Service center and they rectified the problem. I will check with vagtune to see if they can install it properly.

I have opened the white connector. now struggling to find out how to open the notch to locate the back side of connector. the harness will not move down an inch. sorry for the noob questions. could you help ?

Hi manoj, Any idea where we can source the bcm connector pins?

Hi manoj, Thanks for the detailed steps. I will try this and update.

Hi Manoj , Thank you for the excellent info. I have been searching a way to install RCD 330 Plus on my Rapid 2014 Elegance. So far no luck. I tried with multiple adapter . Quadlock and with simulator. but none of them able to detect the ACC position and thus no Bluetooth etc. I bought it from aliexpress. Someone told me that indian Version do no support it. Could you share more details about how to reach the BCM module do the connections ?