brian1.9diesel
Members-
Posts
73 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Everything posted by brian1.9diesel
-
http://cgi.ebay.co.uk/VW-SKODA-FELICIA-ENGINE-136MPI-/230403834102?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35a52380f6 or http://cgi.ebay.co.uk/Skoda-Felicia-1998-1-3-MPI-Breaking-ENGINE-low-miles-/230569740395?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35af07086b I can get a head gasket for £6 and bolts for £1 - 1:50, exhaust gasket each and i can do tge work myself.
-
Hi all, After my Felicia let me down before christmas "brakes binding" I decided to spend some ££ on getting the Felicia back to 100% reliability. While doing the servicing i retightened the head bolts as there was a slight oil leak fromthe front of the engine, i managed to tighen all the bolts except one (I broke it - I know I dont feel very clever) Now that means I have to take off the head - drill out the stud and relpace gasket and bolts. Not having done a gasket on a felicai - is there anything to watch out for? I was thinking as I would have the cam chain off im as well to put a new one on. I would apprichiate some advice and head's up. Thanks.
-
Brakes binding
brian1.9diesel replied to brian1.9diesel's topic in Skoda Favorit, Skoda Felicia, Skoda Fun and Skoda Forman
Rang up the Skoda dealers today and quoted the part number and i will be collecting it on Saturday morning. the one benifit of the calipers kits are the are very quick to change and cheap.......£9-10 per caliper. -
Brakes binding
brian1.9diesel replied to brian1.9diesel's topic in Skoda Favorit, Skoda Felicia, Skoda Fun and Skoda Forman
Excellent....just what i wa looking for!!! Thanks to all. -
Brakes binding
brian1.9diesel replied to brian1.9diesel's topic in Skoda Favorit, Skoda Felicia, Skoda Fun and Skoda Forman
Ive been trying my best to find the relevant kit and no luck. Dose anyone have a part number as im sure rust will appear on the piston again and i will be stuck - again. I need the piston as well as the seals. Thanks all...... -
Hi all, On the way to Biringham today the car the brakes started to bind "front left" When i took the brakes apart the piston would not retract. I managed to get the piston out and the and it had a rusty patch on it. Link below sell Felicia pistons but they dont look like the same cup shape "cup shape" - but will it still work? http://cgi.ebay.co.uk/SKODA-S-SERIES-BRAKE-PISTON-44-5mm-APPRX-/120649481278?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c1744fc3e Where can i get a service kit "seals car is a S reg 1998, 1.3 mpi
-
Well........I went to pick up the car earlier today after travelling 2 hours and the car was not as described!! - When driving there is a knocking noise comming from the front left side - The dash is all badly scraped - The doors cards are scrapped as well - When got back from the test drive the car starting reving, salesman pressed the peddle and it got worse! I left the car as the alarm bells were ringing!! So much for the diesel...........
-
I took delivery of my tempature sender unit and the thermo fan switch today and got them fitted and it has worked. The car once above the 3 oclock position the fan switches on "so an improvment on the 110oC" so the car should sit in traffic alot better and not get so hot. Oh, forgot to say that to fix the problem was £15 delivered £10 for the fan switch and £5 for the reader
-
Do you think that it would make a difference if it was added to the different areas! What type of material would be suitable? There is some sound proofing on the bulk head, but i havnt seen the egg crate style under the bonnet and there is padding on the bonnet but it may be for heat insulation rather than sound.
-
Hi all, This a topic I concidered when I had my diesel before but never got around to it......so here it goes Has anyone on here sucessfully soundproofed a felicia? I done 100 iles in it yesterday and the radio seems pointless as you can't here it properly over the engine. I think the biggest gains for noise reduction would be from the engine bay and the bulk head. Would love to hear peoples views on this or experience. Thanks.