Marcone

Hello,write to me in private and I will send you an address. marco

Hello, I tried to compare the abs codes of my car with one with the off road function,and besides the changes that led me to aback the function I did not find anything else. then I tried to experiment with the instrumentation code, I kicked the whole world ... but no speed limiter .....! I also looked at the electric control unit (9), I watched adaptation, compare and test one by one, nothing to do ..I saw on youtube a video of a car with off road mode and I saw that on the display besides the off road lights, the speed limiter (clock) appears, so I think it is connected to the GRA and limiter function.

Hi, I did a replacement on my car, in off-road mode, can I ask you for information? When you enter the function, the navigator display(amundsen), automatically displays the off-road screen? when it exceeds 30 km / h what happens? turns off the light in the instrument panel? flashes ? Only the Hill descent controll lights off? I did not understand if the haldex differential is blocked by inserting the function, regards Marco

Hello , to all,I decided to retrofit the rear camera on my car,I found the camera code 566827566A and the water wash tube.I ordered the cable for the connection. now the first problem is born ......on the 8pin connector of the camera there are 5 wires,erwin in the connection diagram does not have the crown wire in position 6. so only 4 wires ....in fact even the pre-set cable does not have this wire.

Ho Yuriyk, I just have a moment of time answering you in pm. regards marco

Hi, the dealer probably told you that you have to replace the gateway's control unit, because yours do not support all the functions of the columbus, when you change this unit, the dealer can definitely configure both the gateway and the columbus, also do with vcds by yourself, but you have to be able regards marco

Goodmorning everyone, I have a Kodiaq 2.0 dvd, 4x4, dsg. I would like to make retrofit off road mode, I did a module analysis, 3,19,9,5f. Using the adaptation feature, but I could not find the key and translate the German for the function. I would like to enable the function by using the driving mode on the vessel display, so without installing the button near the gearbox. Someone I could do this retrofit ? even on skoda octavia 3, I think the system is the same. thank you regards Marco I made some progress, Following the forum instructions I enabled the off-road screen. Then looking at the kodiaq scans with off road function I made attempts on the abs code (3 vcds) and I managed to see the off road icon on the navigator display. I then went to the power plant (9vcds) and tried adapting to changing the function of the start stop switch to off-road mode, unfortunately it does not work. I tried then to unmount the fake key on the console, under the cap, there are the button contacts there is no led. Does anyone have any idea? evviva !!! I was able to make retrofit off road mode on kodiak. as first thing I changed the long code of the 3 abs, bit 24, my car 75, modified in 7D. by magic it appeared on the display of the ship the symbol of the downhill control, but it was switched off ..... as a second operation, adaptation cent elect. 9, center console button 2, change function, enable off road. with this the vcds operations are terminated. Quote now we go to the operations on the electrical system, initially I thought the central console button was wired, unfortunately it is not wired ....... let's leave the connector under the button console near the gear lever, 16-pin connector, pin 16 connectors to pin 45 of BCM connector C73, pin 11 connects to pin 50 of the BCM connector C73. the bcm j519 is just above the engine hood release lever, before disconnecting the connector, disconnect the battery pole. we have to disassemble various plastic parts, slide the control unit down and disconnect the 73C connector, the one closest to us. I forgot, the new console code with the off road 566927225B button I hope this document will be useful to all users of the forum, I think this scheme can also work on last generation octavia scouts. best regards Marco Quote

I hope this document will be useful to all users of the forum, I think this scheme can also work on last generation octavia scouts. best regards Marco

now we go to the operations on the electrical system, initially I thought the central console button was wired, unfortunately it is not wired ....... let's leave the connector under the button console near the gear lever, 16-pin connector, pin 16 connectors to pin 45 of BCM connector C73, pin 11 connects to pin 50 of the BCM connector C73. the bcm j519 is just above the engine hood release lever, before disconnecting the connector, disconnect the battery pole. we have to disassemble various plastic parts, slide the control unit down and disconnect the 73C connector, the one closest to us. I forgot, the new console code with the off road 566927225B button

evviva !!! I was able to make retrofit off road mode on kodiak. as first thing I changed the long code of the 3 abs, bit 24, my car 75, modified in 7D. by magic it appeared on the display of the ship the symbol of the downhill control, but it was switched off ..... as a second operation, adaptation cent elect. 9, center console button 2, change function, enable off road. with this the vcds operations are terminated.

I made some progress, Following the forum instructions I enabled the off-road screen. Then looking at the kodiaq scans with off road function I made attempts on the abs code (3 vcds) and I managed to see the off road icon on the navigator display. I then went to the power plant (9vcds) and tried adapting to changing the function of the start stop switch to off-road mode, unfortunately it does not work. I tried then to unmount the fake key on the console, under the cap, there are the button contacts there is no led. Does anyone have any idea?

Hello, I can not find anywhere the translation of the long code of the abs control unit ..... I have to activate acc but I'm going to try ... Do you have something? thank you

Hello, I also bought a short time Kodiaq 2.0 tdi, 4x4, dsg. Many long codes are not available, However, through the adaptation channel you can enter the control unit and modify the code. I followed the octavia 3 procedure on the site and I "played." If you need something in particular let me know if I can help you. Marco

Goodmorning everyone, I have a Kodiaq 2.0 dvd, 4x4, dsg. I would like to make retrofit off road mode, I did a module analysis, 3,19,9,5f. Using the adaptation feature, but I could not find the key and translate the German for the function. I would like to enable the function by using the driving mode on the vessel display, so without installing the button near the gearbox. Someone I could do this retrofit ? even on skoda octavia 3, I think the system is the same. thank you regards Marco

Goodmorning everyone, I'm a fan of electronics, I would like to make retrofit to my Kodiaq, I'm working on acc, and off road mode.