mk2octavia

Thanks. I'm gonna get the pro version and long code it

I have a mk3 octavia SE L and I was trying to turn on the battery state of charge mod with obdeleven so that I can see battery status when I keep the trip reset button down on speedo. It says it's turned on, but it actually dosent turn on because when you go back onto the mod, it says that it is turned off. It has used all my credits too lol by me trying to keep activating it. Does anyone know why it's doing this?

So today I fitted my window switch. I took my door card off and did it according to the pictures. It was a fiddly job, but i got there in the end. I did manage to scratch the door card a bit, and one of the clips for the surround cracked. But its all fitted now and the switch is working. Once again, Thank you for the help and the pictures. I really do appreciate it!

Thanks for that! Thats a really big help. I'm gonna do it tomorrow afternoon and I'll update you on how it goes.

Oh right i see what you mean now. Thanks for that. I'm going to give it a go on the weekend when i have some time to spare. Thanks for the advice. Much appreciated!

Thanks for that. I'll give it a try and see how it goes

There seems to be a torx screw on the door card behind the door handle cover. But if the switch is in the door card, would i still be able to tighten that screw. Because i have been told that if the switch is in the door card already, and when i fit the door card back onto the car, i would not be able to tighten that screw.... Thanks

Hi, I have bought a mk3 skoda octavia and the rear window switch was faulty. So, I removed the old switch with the surrounding. I have bought a new one, but i am having difficulties in fitting it on now onto the door card. It seems like a really tight fit, and i just cannot get the surrounding of the switch to clip into the door card. Does anyone know how to fit one of these? Or has anyone done it before? Its the passengers side rear one which i am trying to do. Thanks

I've had a look and there doesn't seem to be a nail in the tyre....

Hi, I have a slow air leak in one of my tyres. I am losing about 5 psi in about 4-5 days. I dont think its an actual puncture and i believe the air could be leaking from the side wall. Is there any tyre sealant which i can use to stop the air leaking out?

Hi, one of my rear parking sensors have failed. My part number for my current sensor is 7H0919275C. I have found one in the exact same colour as my current one on ebay but the part number is different. The part number for that sensor is 4B0919275E. The sensors look exactly the same. However, the part number is different. Does anyone know if it will still fit and work on my car?

Hi, i have a mk2 octavia hatchback elegance. The drivers side rear parking sensor is faulty. Its the one on the far right hand side of the bumper. Has anyone ever changed this? I want to know if it is easy to change without having to remove the bumper. Would i be able to do it by getting under the car and removing the cover underneath and reaching up to it? Or can it be done by removing the back light and the trim underneath it? Any help would be appreciated. I dont really want to remove the whole bumper for it.

It could be the parking sensor control module. On my hatchback, its located on the passenger's side of the boot. You need to take the boot side carpet off to get to it. All four of your sensors cant really go at the same time. My speaker once got faulty and the sensors stopped working

The front ones also cost me £19 from euro car parts. I used a discount code online, and then collected them in store.

I bought some BOSCH ones from euro car parts today. The front ones are great. But the BOSCH rear one didnt fit my car for some reason. I couldn't get it to fit on the wiper arm and push the clip into its place. I didn't want to force it and break it so I just took it back and returned it. It was the only one they had for an octavia. I might try a valeo one on the rear as Fin69 said.

Hi, My mk2 octavia is in need of some new wiper blades. The question is, which brand should I go for? I want the aero flat type ones. My current ones are bosch..... I have heard that some people have experienced problems with some wiper blade brands not clearing the rear screen properly..... Which brand do skoda originally use theirself? Or do they make their own blades?

You can add a spoiler to the rear. There's a smaller lip spoiler and the vrs spoiler for octavias. Changing alloys would make it look better. Mine has 17" pegasus alloys on it and it does stand out.....

Yes, you would be able to do that but you will need to change everything. After doing the engine, you will need to change wiring loom, ECU, ignition etc to be able to start the engine. Why do you want to do this anyway?

Getting new tyres on the rear and a four wheel alignment this week

Hi, My rear tyres are wearing on the inner edge. The passengers side is worse than the drivers side. Tyre size is: 225/45/17 What can this be down to? Do I need a 4 wheel alignment? I had my front wheels aligned by national tyres over a month ago. I didn't notice they were wearing on the inside edge then.... maybe because they werent that bad that's why I didn't notice.....

Do I need to get the wheel alignment done after replacing the spring? I'm getting the spring changed on Thursday and the cars parked up till then....

My car was making a little noise sometimes after going up speed bumps. So today, I jacked it up, took the wheel off, and noticed the OSR coil spring was broken...... Can a broken rear spring effect the tyre wear? I know if it's the front ones, it probably would affect the tyres but can the rear one also effect the tyre wear?

I doubt they will be the same. A 140 BHP and a 105 BHP turbo are highly likely to be different.

Had the tyres fitted today

Hi, I am looking for a single 17" pegasus alloy wheel for my skoda octavia. Can anyone help? Thanks