Edz_VRS

Hi this is the coding I did for the rear fogs... Controller 09 - Central Electronics 16 - Security Access - enter 31347 10 - Adaptations (4)-Leuchte26NSL LA72-Lichtfunktion A 26 Set to "Nebelschlusslicht wenn kein Anhaenger gesteckt" (4)-Leuchte27NSL RC6-Lichtfunktion A 27 Set to "Nebelschlusslicht wenn kein Anhaenger gesteckt" change (6)-Leuchte26NSL LA72-Dimmwert AB 26 from 0 to 100 change (6)-Leuchte26NSL LA72-Lasttyp 26 to "32 allgemeine LED bis 12W" and the near side fog will work.

Thanks for this, worked great for me. Agree about the glovebox damper, what a PITA!

All bulbs upgraded now to LEDs with the ones from aliexpress arriving for the boot - have put some in the red lights for the door cards so will see if these flag up error code...

Hi Ethan mine is called "Multifunction module "

Sorry you're at the limit of what I know about - it was on my list in OBDeleven for the coding i followed there were mods to do in Controller 09 Controller A5 Controller 4B and the error code was in 4B so I did the bit above after saving all the coding

This was the problem I had too, and looking at the various posts on here i did the following and it worked a treat

Bought as a cherished reg I'm afraid, back in 2001...

Finally some decent weather here after I'd washed the car yesterday

Yeah it's lovely on days like today but does do rain a lot!

Thanks that's worked :-)

Thanks I did try that but don't know how far zoomed out they still show, if that makes sense (not many that close to me but I know where one is so will go for a look over the weekend)

Thanks I'll give that a go and see if it works.

Eyelashes are the little vertical lines above the DRL LED bar that come on with the main headlights.

Last car had them out of the box (from a different German manufacturer) so fancied them on this one seeing others had done it...

Thanks for this, seems to have worked fine on the import and symbols but need to go near some cameras now to see how they show up!

Hi all, Thanks to all of the guidance on the forum I've managed to do the following on my FL O3 in the couple of weeks since my OBDeleven arrived. fan speed in auto passenger dip in reverse HBA Eyelashes for DRLs Cornering lights TSR The last thing I'm trying to do (for now!) is to enable both rear fog lights - tried this as below but doesn't seem to have worked... Controller 09 - Central Electronics 16 - Security Access - enter 31347 10 - Adaptations (4)-Leuchte26NSL LA72-Lichtfunktion A 26 Set to "Nebelschlusslicht wenn kein Anhaenger gesteckt" (4)-Leuchte27NSL RC6-Lichtfunktion A 27 Set to "Nebelschlusslicht wenn kein Anhaenger gesteckt" (which mine already seemed to be set to) change (6)-Leuchte26NSL LA72-Dimmwert AB 26 from 0 to 100 for the near side fog will work. Any help much appreciated!

Thanks John that's worked on mine too :-)

Checked this evening and this seems to have worked by just altering the 4 sets of values.

Thanks for the tip on OBDeleven for the coding, hopefully someone will have the answer to the A5 bit.

Thanks for the link - have you managed to get cornering fogs for the FL vRS working - I don't seem to have the necessary "statisches kurvenlicht" bit in Adaptations in module 09 - or anything else with licht in that might be a suitable candidate. The lower section worked fine as I found the other parameter to work out left from right!

Hi all, I've tried this on my FL O3 but the relevant parts under A5 don't seem to be present. Also using OBDeleven it explains all the long coding so I'm not sure which byte/bit name in module 17 (alhough there is only one likley suspect so I expect it is that as it mentions traffic signs in the coding). Any ideas to try would be great. Thanks, Ed

Thanks for this worked great on mine. Error sorting was the final sort i hadn't done from the other link. I think the HBA is better than my last car. TSR next...

Ones linked to on another page on here from aliexpress • Rear indicators ○ https://www.aliexpress.com/item/2pcs-Amber-Yellow-Error-Free-BAU15S-7507-PY21W-1156PY-LED-Bulbs-w-Reflector-Mirror-Design-For/32316963252.html?spm=2114.01010208.3.46.dmG1Ql&ws_ab_test=searchweb0_0,searchweb201602_1_116_10065_117_10068_114_115_10069_113_9905_10017_10080_10082_10081_10060_10061_10062_10056_10055_10054_10059_10078_10079_10073_10070_421_420_10052_10053_10050_10051,searchweb201603_6&btsid=96afbece-b67f-4ef9-a8ff-ddccd8633f9cInstalled • Reversing lights ○ https://www.aliexpress.com/item/HotSale-2pcs-lot-super-brightness-High-Power-1156-led-30W-CREE-XBD-p21w-led-ba15s-Reverse/2036956876.html?spm=2114.13010608.0.0.2p5MhW If the links aren't quite right there is another page... see below Checked with obdeleven and no fault codes stored either.

Put reverse leds and rear indicators in mine yesterday and no fault codes so far... Lovely bright white light compared tp the standard bulbs.

Both of these arrived this weekend so have fitted them and very pleased - installation was no problem and much brighter as well as being better looking :-) Got these as a free gift, are they suitable for anywhere on the car?