Skodillac83

Thanks for the tip. Is this from the tail light pcb or something else? I'm assuming the only option I have is to cut through the black silicone seal between the "glass" and the housing to get to the pcb.

Ok, so I did the swap and the faulty light did not work on the left side, meanwhile the workong light also worked on the right side. So on conclusion, it seems like the PCB that operates the LEDs is damaged. So my options are to replace the housing.. basically. But I'm tempted to try to crack open the housing and have a look at the damage. Thanks for the help and support.

Sounds like a plan. Thanks for the tip. Does anyone know if the left and right unit has the same connector (not mirrored or anything)? I was thinking if I should try connecting the right tail light to the left side to make sure the light unit is ok, or vise versa.

Hi. Has anyone encountered this problem? The LED's on the right side are dead while turn signal and break light still work. Also the small light LED's on the boot are also dead. I get the following error code. B12BF15 (see pic for more details) Milage 201k. Thanks for the help.

Hi, my name is Tomas. I'm a hc diy fan so the more iI can do myselfe, the better. Atm I'm driving a 2017 Superb. Looking forward to diy:ing with all of you.

Hello. Don't know if this is on topic or not but is there any way of disabling the scanning for mobile phones? I can't connect my phone via bt (and i've updated my sound system to an after market one) but the car is still scanning for a connection. Any way of turning this off? Thanks!

I need to try this method. I sure as hell am not gonna pay 100€ for any after market activator. Would it be enough to just remove the fuses for the radio and amp? Thanks