vulture30

... And I will fix it again because I really like twin door

I thought the same two years ago, but now I have again no soft close and no light inside

Yes, but I like this options and always use small boot. I now that probably it will happen again BTW I had a compilation of electrical faults that were responsible for not working soft closing : - broken wires in hinge - broken micro switch (this with flap, on the bottom - broken one of two micro switches in boot lock (this was the most difficult because second switch was working and I received information about lick position. This was very misleading. )

Thank you for fest response I used many liters of water with stalk on bottom position now I know why they didn't move

OK, but when there is no rain any more wipers are stopped or run on minimum intermittent?

Hi Does auto wipers start too move wipers if stalk is in Off position? Or I have to move stalk then auto wiper will vary the speed and intermittent period?

Hi Guys Can you confirm what to do to activate soft closing without hatch closing? Close latch on the open hatch and press microswitch on the bottom (greenliner photo) is enough to start soft closing motor? Mt issue is that soft closing is not working. Broken microswitch replaced, boot wiring repaired, microswitches inside soft closing motor ok. I have to find out if the problem is on soft closing motor or car driver side.

No, it is not needed. I don't have electro seats and have mirror dip on reverse activated. I was trying by long coding but no effect. I found on vw golf forum that we have to activate bit 'memory seats installed' but I don't know where it is. Then I used OBDeleven pro embedded function 'mirror dip', one click and it works know

dkarolj, Thank you for your post. I gave up with HHC few weeks ago, after unsuccessfully attempts. Then I tried to find by pump HW 3T0907397C. I found your thread. I have changed in 09, byte 16 , bit 0 from 0 to 1 and HHC is working now I don`t know what did wrong before but know it is working fine