Thin_white_duke

Many thanks to the OP for the detailed instructions and pictures, I couldn't have figured it out otherwise. I actually fitted a Nextbase Piqo dash-cam to a Karoq, but it was all the same. I used an open end connector on the earth screw so that I didn't have to completely remove (and risk dropping) the screw. Removing the glove box is tricky, but I now know to ease out the lugs either side with a screwdriver rather than squeeze in the glove box and to re-attavh the damper before re-engaging the lugs.. Getting the wire from the side panel to the fuse-box area was tricky, I pushed through I some rigid wire and used it then to pull the wire into the fuse-box. I also bought the Nextbase hard wire kit to make it easier and ensure the correct voltage.