Dave1982

Wino, you were right! It was indeed fuse 11. When you said “have I checked fuse 11” I did, but I was looking at the fuse box diagram back to front 😬 so a new window switch, new loom and several hours scratching my head was all because of a missing bloody fuse 😳 anyway, a note to anybody with windows and mirrors not working.. don’t just check fuses 51 and 52, because fuse 11 also operates the windows! thanks to all who commented, especially Wino. cheers

Thank you

Also if anyone needs a new loom, I e got one

Just a quick update for anyone wondering.... the new replacement loom did nothing both windows and mirrors completely dead. I’m sick of the sight of it now, car will be gone ASAP.

Yep fuse 11 checked for the mirrors. All good

Just spoke to Mike at Coverdale, and replacement loom ordered 👍 I did check that all the fuses were ok ( which they were) I even replaced the two 25 amp fuses as someone suggested trying new ones. No difference I’ll double check fuse 11 and report back......

Thanks Wino, if you haven’t guessed already, I’m a complete rookie at this sort of thing! when I originally removed the door card, I couldn’t see any obvious signs of wire breakages etc, so I stripped the black wrapping that covers the whole loom away searching for a possible kink or bare wire, stupidly I threw the part number away along with the black wrapping. (I know, idiot!) With regards to the old loom, you’re welcome to have it for nothing, but I really have made a pigs ear out of it! Once again, thank you for your help 👍

Thanks for the links Wino, the part in the link states that it’s for a front left and I need a front right or are they the same? I’m not going to attempt a repair on the existing loom as I butchered it a fair bit removing it from the car (I’m preparation for the new loom) there were no broken wires or anything obvious, so I’m hoping a new loom will solve my problem (both electric windows and mirrors not working) Both fuses are fine, windows go up and down when key turned in door lock for 3 seconds, so it’s not the motor. Window switch has also been replaced. If it’s not the loom, not sure what else it could be ? Thank you to everyone else that commented too 👍

Chimaera, much appreciated

Hi Wino, thanks for the quick reply...... not to worry, I’ll see if I can order the correct part from somewhere (easier said than done) 🤔 Regards, Dave

Hello all, I need a new drivers side door wiring loom for my skoda fabia 2008 1.9tdi. the part number I need is 5j0971120bl. There’s a new replacement loom on eBay part number 5j0971120al . Will this work?

Hello all, I need a new drivers side door wiring loom for my skoda fabia 2008 1.9tdi. the part number I need is 5j0971120bl. I can only find part number 5j0971120al . Will this work?

Hi Kristian, they are permanently stuck, no noise when you push or pull the button

Thanks for the reply, I’ve tried two separate switches, so unlikely to be that

I’ve owned over 30 cars and never had any issues with power windows.

Hi Stuart, I’ve given up on the damn thing.... I did briefly get the drivers side window to go up and down by wiggling the wires that plug into the switch itself, so it’s obviously a loose connection somewhere, I just can figure out where? My clutch is slipping, the timing belt needs changing and I’m pretty sure the drivers side c.v joint in knackered, so the car will be gone soon (it’s doing my head in) will never have another skoda again. regards, Dave

Ok thank you

Wow

Hello, new to this forum, so apologies if I have written this in the wrong section. I know that my issue has been covered a lot, but I am still stumped..... I’ve checked both 25amp fuses which are ok, I’ve checked for any loose wires near the door hinges and removed and reinstalled plug, I’ve removed the door card and couldn’t see any loose wires. Window switch has been replaced so not that..... there doesn’t seem to be any power going to the switch according to the multi meter? the motors inside the window are fine because both windows operate when you turn the key manually in the door lock. any ideas would be appreciated. thank you