burek

Until now, had no idea that there is so many favorits and felicias also in west Europe. Nice!

I did everything as you say and it works! Idle is spot on now! Thank you Palhu and Thefeliciahacker.

OK i have a VAGCOM KKL cable, but it says "Port not ready". Tryed on both win 10 and win 7, both the same. Solution?

I will try with brake cleaner tommorow, if there is some vacuum leak. But, before cleaning the TB, this was not the case. Before the idle was, when going down, went to 500 an then to normal. Does this SW work with a ross tech vagcom cabel?

Hello! Im having a same problem, than author of the thread. I just clean the throttle body, after putting back it show same problem as author. That is: if let go fo throttle at 1500-2000 rpm, idle cannot find its way down. Tap the throttle, rpm go down. Let go throttle at higher rpm, rpm go down. Idle is normal at 800 rpm (when its not 1500-2000). Other wise car work 100% normal. I did TBA reset i think 10 times with VAGCOM, so difference, also clean the sensor on intake manifold. Solution?