snr1997

The connectors on both ends are in good condition no sing of damage but had to stop there for the time being as had to get stuff sorted out in the house

So after testing the pins 112 that's at 5v and pin 104 is at 0

Can you able to post a picture of the pins please to make sure I'll be getting the right ones.

Also tested the CTS before putting it in and it was in the correct ranges when ether at room temp or in a glass of hot/near boiling temp water

So tried unplugging it and clearing the code and still comes back, with or worth out but the temperature doesn't drop or rise of unplugged at all. And yes it's an genuine part as well

Hey guys, need some help have a Mk1 1.4TDI 05 plate Fabia, replaced the Engine Coolant Temperature sensor as have got code P0118 after replacing it and clearing code still have got the code, ran the engine and am getting a correct temp reading though the OBD2 port and on the dash, the wiring is good at the plug but did a voltage test on the plug and came up at 0.62 something volts anyone have any ideas what could be causing the code P0118 still??