GucciBruce

Hi all, I own a VRS 2008 diesel and have just installed a turbo gauge. I've managed to feed all the wiring and tubing correctly and connect the (+) hard wired to the fuse box inside the drivers side 👍 The (-) connected to the battery safely so that side of things are all done and it's working per say... The only thing I need to do now is connect the silicone tubing to the turbo intake piping but I'm hoping someone can direct me (with a diagram) preferably to where I need to connect it please? Otherwise I'm just left with a gimmicky dial sat lit up doing nothing 😂 Thanks in advance 😊

Hi again, Well it's worth a shot as weird as a suggestion that it is 😊 It worked on my car and it was suggested by a mechanic at the VW garage 👍

Hi there I had exactly the same problem and although the fuse was showing as OK it still turned out to be that 👍 Do the following first and it wil solve the problem. First remove the corresponding fuse related to the horn and then start the car. Then turn off the car and replace the correct fuse (use a new one) then restart the car and bingo it should solve the problem 😊 it worked a treat on my VRS 2008 so let me know how you got on.. regards Gucci Bruce