goodguy

Ok I have managed to push chrom trips on right place, but the rubber bellow is still to much to the back (right). This rubber is catching backdoor chrome trim. So I probably should move whole rubber thing more to the left. How can this be done?

Since I don't have radio unit with GPS is this module installed despite that? Before I begin to remove radio unit and all this stuff will try this today thanks for now

Hello, I have superb 2015 (mk3) and there are 2 issues which I really want to solve. First issue is that I have buzzing noise coming from dashboard. It starts at around 2000 rpm and goes off at around 2500 rpm (+- 200rpm). You can hear this if you check the video on the link. Anyone has any clue what is causing this? Since temperature drops maybe this sound is less noticeable but in the summer is like driving some old tractor where everything is falling apart . The sound I am almost sure it's coming from the inside the car (somewhere near the top speaker is at). https://1drv.ms/v/s!AnOF5Gi4sTGxgd5hDQ8Qs-w1jRQSKg The second problem is if you check picture bellow. This two silver things are to close to each other (there is no gap like on the middle of the door) so they scratch the ends. Also the whole rubber which is holding this silver part is to much to the right on driver side of the door (and the end of it is already missing), so sometimes whole thing slips under the back door part and it un-clips from rubber which holds it (also on picture bellow). As far as I know the whole thing must be moved so the gap from the picture of the mirror is much smaller. The issue appeared this year, but year before the doors where repainted (some scratched them). Anyone knows what must be done to move this thing? Thanks