qrylix

Being the Felly OBD1, do you have any VCDS that i could get to read and clear the codes?

I have not checked the radiator switch, but everytime i stop the truck it turns on after a few seconds no problem, connections are tight yes. The coolant sensor was all rewired from new soo that would not be the problem. Yes the sensor is new, already had 3 installed.

As for the sensor i am at my 3rd one i don't think they would all be bad. The wiring for the sensor was all revised 2 times now by an auto eletrician soo that's good too. The problem is once the truck runs for a while and gets to operating temperature it won't turn the plugs anymore and won't start, this was told to me, as being normal and that the truck should actually still start since it is indeed still hot but it just cranks, if i unplug the temp sensor it forces the plugs they turn on and the truck starts like nothing. As for the temperature it still raises to about 105 ish and i don't hear the fan kicking in, if i park the truck and let it run at 95º it turns the fan on.

Hello, i have had my Felicia for over 2 years now, and since then i have had a few problems with it starting, i would go into it and when i tried to start it, it would not light up the glow plug light, after digging around some old posts on the forums i changed the temperature sensor, this fixed the problem for a couple of days but eventually it started doing it all over again, i took it to an eletrician and after him gaving it a look it starts everytime when it's cold, but after being hot it won't start. Right after i changed the temperature sensor the truck started getting hotter than it did before, climbing over to close to the 110Cº mark and no fan kicking in i have no clue to what else i could do to fix it. In summary: New temp sensor, temperature got way hotter and won't start when the engine is hot