vrsse202

Hi Guys, I have a 2007 Mk1 VRS SE, any of you know which is the correct wheel bearing from the below? https://www.gsfcarparts.com/za050451 https://www.gsfcarparts.com/za021567 Many thanks!

Hi guys, Currently looking at new tyres for the fabia, I need some advice as to what size tires will be best, the car is currently on air and the tyres rub quite a bit when running low due to how "chunky" the tires curtrently are, does anyone have any images of the tires they are running on the standard VRS alloys? Just looking for a good fit to tuck under the arches. For anyone who doesnt have the standard alloys, the wheel size is 5x100. 6.5J. Et37 Many thanks!

tried that, seems to be working as intended, still having the same issue!

Long story short, I was having issues with braking on my mk1 fabia VRS, pedal sometimes went to the floor with no breaking at all, if you let off and pumped the pedal, normal breaking continued. The master cylinder was replaced and a new fault has shown up, both front calipers are sticking badly, after 15 minutes of driving the brakes are fully on and it wont drive. Has anyone seen this before or have replaced a master cylinder on one of these and have any advice? from what I gather the new master cylinder is not releasing any pressure on the front wheels, is it possible the new one is faulty or not the correct one? Many thanks

Hi guys, strange fault with braking on my mk1 VRS, occasionally the pedal will go to the floor with no braking at all and I have to release and push the pedal again to get any braking, any ides on what this could be? Brakes have had new fluid and bled twice so far, this has made no difference, it has new pads and discs all round less than 2k miles ago, no signs of any buldging on pipes either. Bit stuck now as its not the safest to drive!