nomad_Fsoak

Not 100% sure, but I think it's not so easy... because from what I know it has constant +12V and the power on/off signal goes by CAN interface not the switched power.

Lift was in 2010 model year. Dance is pre-lift radio, Swing is post-lift. In Your case the radio won't work with the ignition unless You'll add can adapter. As for VCDS - you need to add/code the radio in the car using VCDS (diagnostic interface used by dealers or private owners) but in the case of adding post lift radio in pre lift car it can't be done directly from what I know, rather has to be programed (in terms of equipment like BT or Parking Sensors) in post lift car and then plugged into the target car.

2.0 1.6 was in the pre-lift version.

1.Pre-lift and post-lift radios have different communication with the car (CAN 1.6 vs CAN 2.0). Therefore if someone wan't to put facelifted radio/navi in pre-lift car the can adapter has to be added (quite pricey) and even then there are some issues whith communication f.e. with VCDS, not sure what happens when You try the older radio in newer car. Also from what I remember, You need do "marry" new unit with VCDS, so the car equipment that are also stored in radio (f.e. parking sensors) match.