jfelix

Maybe the system is not making enough cooling. In the machine the low pressure side reports -5° but in the vents don’t get lower then 16°.

I trust my mechanic. we connect the device who charges and analyze the AC system and it’s all good. As I can tell the battery and charger are good too.

But that in dual zone right? in my case is single zone.

I measured with a digital thermometer. Is not a stuck vent, i visually check all of them and seams working fine. I don’t think ia a clogged vent too, the flow of air is the same as the driver side, so I don’t think is that. Also I was able to inserts a cable gide from the passenger vent to the central vent. Is possible that the AC isn’t make cool enough? The minimum temperature that i as able to measure is around 15°/16°, should it be below 10°?

I think the same, but i check the flaps visually when they are in movement and i don’t see anything wrong. No, they didn’t check for that

It’s single zone. Starts right away, wile the driver side gets cooler and cooler (16°) the passenger side never gets that cold (26°) at 30° of ambient temperature. temperature - minimum speed - 2/3 zone - face AC - on Recirculating - on or off the result is the same

Hello every one, I hope you can help me resolve my problem. My AC is more cool on driver side then the passenger side. Difference like 10° from one side to another. My mechanic already check the coolant gas and is all good. I start to disassembling the climate unit hoping the problem was the trap doors o redirect the air flow. But I see nothing out of the ordinary with the trap door, motors, sensors and heat exchanger from AC. Any ideia what looking for? Best Regards João Félix