Skodaper

*NEW INFO* I was lucky enough to get more errors today 😞 Here is a copy of my OBD-reading: Car Scanner ELM OBD2 DTC report Selected brand: Skoda VIN: TMBFT61Z8C2041017 ============1============== 6013 Raw code: 00177D ECU: Engine control unit Status: Test failed, Pending, Confirmed, Test failed since last DTC clear, Test not completed during this operation cycle, Warning indicator requested ============2============== 1314 Raw code: 0522 ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Engine control unit ============3============== 1315 Raw code: 0523 ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Gearbox control unit; Transmission control unit ============4============== 1316 Raw code: 0524 ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Brake control unit ============5============== 1321 Raw code: 0529 ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Airbag Control Unit-J234; Airbag control unit J234 ============6============== 1771 Raw code: 06EB ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Headlight range control unit-J431 ============7============== 0381 Raw code: 017D ECU: 19. CAN Gateway Status: Test conditions are met, Validated and stored in non volatile memory Skoda Fabia 2015-2021; Scala, Kamiq 2019-2021: C101C11: Left rear ABS wheel speed sensor Short circuit to ground Skoda Octavia III 2013 - 2020, Kodiaq 2017 - 2021, Karoq 2018 - 2021; Octavia 2020-2021; Superb 2015-2021: P10FA00: Heater support pump No activation Skoda: Instrument cluster data bus; Data bus instrument cluster ============8============== 0474 Raw code: 01DA ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Immobilizer control unit ============9============== 0466 Raw code: 01D2 ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Steering Column Control Unit-J527; Steering column electronics control unit-J527 ============10============== 1320 Raw code: 0528 ECU: 19. CAN Gateway Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory Skoda: Climatronic control unit-J255 ============11============== 1315 Raw code: 0523 ECU: 03. ABS control unit Status: Test conditions are met, Validated and stored in non volatile memory Skoda: Gearbox control unit; Transmission control unit ============12============== 1314 Raw code: 0522 ECU: 03. ABS control unit Status: Test conditions are met, Validated and stored in non volatile memory Skoda: Engine control unit ============13============== 1321 Raw code: 0529 ECU: 03. ABS control unit Status: Test conditions are met, Validated and stored in non volatile memory Skoda: Airbag Control Unit-J234; Airbag control unit J234 ============14============== 0778 Raw code: 030A ECU: 03. ABS control unit Status: Test conditions are met, Validated and stored in non volatile memory Skoda Rapid EU(A-Entry) 2013 - 2021; Fabia 2015-2021; Fabia 2015-2018; Scala, Kamiq 2019-2021; Octavia III 2013 - 2020, Kodiaq 2017 - 2021, Karoq 2018 - 2021; Octavia 2020-2021; Superb 2015-2021; Citigo 2012-2021: B140615: ambient light.chan. 1 Open circuit/short circuit to B Skoda Rapid EU(A-Entry) 2013 - 2021; Scala, Kamiq 2019-2021; Octavia III 2013 - 2020, Kodiaq 2017 - 2021, Karoq 2018 - 2021; Octavia 2020-2021; Superb 2015-2021: U163E00: Android Steuergerät ungültige Protokollversion Skoda: B118F13: Convertible top open position switch Open circuit Skoda: Steering Angle Sensor-G85; Steering angle sender G85 ============15============== 0526 Raw code: 020E ECU: 03. ABS control unit Status: Test is inhibited by other DTC, Validated and stored in non volatile memory Skoda Rapid EU(A-Entry) 2013 - 2021; Fabia 2015-2021; Octavia II 2009 - 2013, Yeti 2010 - 2018; Octavia III 2013 - 2020, Kodiaq 2017 - 2021, Karoq 2018 - 2021; Superb 2015-2021; Citigo 2012-2021: B1109F0: Connections to left speakers Short circuit to each other Skoda: B119D13: Power convertible top valve 3 Open circuit Skoda: B105FF0: Left front bass speaker Short circuit to each other Skoda: B1064F0: Right front treble speaker Short circuit to each other Skoda: B1061F0: Left front treble speaker Short circuit to each other Skoda: Brake Light Switch-F; Brake light switch-F ============16============== 1435 Raw code: 059B ECU: 03. ABS control unit Status: Test conditions are met, Test is inhibited by other DTC, Validated and stored in non volatile memory, Validated fault present at time of request Skoda: Brake Pressure Sensor 1-G201; Brake pressure sender 1-G201 ============17============== 6013 Raw code: 00177D ECU: 01. Engine control unit Status: Test failed, Pending, Confirmed, Test failed since last DTC clear, Test not completed during this operation cycle, Warning indicator requested ============18============== 1321 Raw code: 0529 ECU: 18. Additional heater Status: Test conditions are met, Validated and stored in non volatile memory Skoda: Airbag Control Unit-J234; Airbag control unit J234 ============19============== 1320 Raw code: 0528 ECU: 18. Additional heater Status: Test conditions are met, Validated and stored in non volatile memory Skoda: Climatronic control unit-J255 ============20============== 2245 Raw code: 08C5 ECU: 18. Additional heater Status: Test conditions are met, Validated and stored in non volatile memory Skoda: Radio Remote Control Connection; Radio remote control connection ============21============== 1408 Raw code: 0580 ECU: 18. Additional heater[Archive (inactive)] Status: Validated and stored in non volatile memory Skoda: Power failure trip (fixed value); Undervoltage shutdown (fixed value) Anyone who likes to take a shot of what this can be? In addition to glow-lamp flashing, the low pressure tyre warning and ESP-warning popped up in the dash.

Now it all made sense! Thanks for your patience. Good man!

Thanks for explaining, but we're quite not there yet, I'm afraid. I don't know where to find connection 54, with regards to my fault finding. And also a wire from ABS unit goes through A18 and to F. Right?

Thanks for the reply, but where can I find it? Not sure what DIN72552 is either :/

Thank you for your advice. I will check it out tomorrow. Regarding the 3rd brake light, I discovered there was different readings with my multimeter at the connector just today. I measured DC and had to wiggle the connection to get 12,4 V DC. I noticed a bend in the ground wire, cut it and replaced the bad part. Deleted fault code, but nothing. Brake lights now was always on until the fault returned after a few minutes.

Good evening. Does anyone know what A18 on the schematic is? It says "Connection (54), in dash panel wiring harness.

UPDATE Tomorrow I'm renting a VCDS and going to dive deep into my problem. Any suggestions on what to test? I have never used this tool, but are going to educate myself tonight on youtube and the web. Cheers Per

It is a mystery, yes 😞 Right now I am frustrated because of the lack of result from my own and VW-garages faultfindingprocess. Can it be a relay somewhere causing this?

I will check it out. Thank you.

This is the errorcodes I got at first, with the obd-app not set to my enginecode: P0341 - Camshaft pos sensor A, bank 1 - range/performance problem P0017 - Crankshaft pos/camshaft pos, bank 1 sensor B - correlation. My car had a diagnose at a local garage and they got the same errorcodes, read from a bosch-kit. Both sensor has been replaced. Then I bought a VAG diagnose from a retaildealer and got the code P0571 - Cruise/brake switch (A) Circ., malfunction. This code is still present. My question is how this errorcode has to do with my brakelights? The brakelightswitch-circuit don't include wiring in the trunk?? Here is the summary from when VW-garage did a faultfinding session: " Fault code engine: P057100: Cruise/Brake Switch (A) Circ. Malfunction Error type 2: active/static- Checked fuse SC2 OK. Dismantled ok checked contact on F47. Scooped signal from the two switches in F47. OK. Controlled wiring harness up to engine control unit. slack in stitches T94/33. This comes from the F47 T4c/3. Raplaced sticks. Tested on new, Error returns after short drive. The lock for the gear selector and the light in the instrument panel for the brake pedal are not in order. When the error code is set, this works again. Can't bring anyone up MVB on brake switch in engine management.

I bought a aftermarket type, but it was approved by the VW garage and confirmed working as a original part. Filename is the same as I have, yes. Thanks.

The brakeswitch and connection is in good condition, this was checked by VW garage this summer. They could not find any issue that could cause the error and wanted me to schedule a new appointment, but this was calculated to be 650£, so I passed 😛

Understood. I will look into it. Thank you.

Yes I did, I found out later. Thank you.

I will try to break it down completely. By checking for poor joints in the unit, do you mean the LED-points? Thanks for the tip!