fatherted444

If so can you call 01555 840055 as we are not on computer

can I pick it up today

Is this still for sale cheers

from lowest seting min anything from 7.5 to 16 at front of vent with temp probe against vent,not all reach 7.5 but anything up to 10 will be very cold{my furby is 8 }but its just had condenser repair and regas month ago so still very cold at min,dealer should be able to check pressure in 10 min he will know right away if any probs with readings hope this helps

why do you need demo have you got fault,lamp on,bad performance,not just vag com to show up falts as other tools do same, an can show live data as well

get pressure checked first at any, or main dealer first then look for faults,a stone goes through the condenser very easy even on one week old cars changed a few before,first check is visual then pressure test only takes 5 min cheers

the only thing to get clogged up is filter under pass glove box,will cause winscreen to mist up and fan to sound slow,but air con is sealed sys with 1 highside valve and 1 lowside valve,if used reg should be ok,but can loose gas over time/less use,normaly just needs a little top up,cheap to do any air con specalist will keep you right there hope this helps ps[i normaly charge

get pressure check done it will be under warranty so no wories,some times they can sit around before geting sold and need a little top up on gas,was it working ok at first,cheers

under bonnet drivers side at fuel filter two alloy pipes one with round switch for pressure of gas in system,pressure drop air con wont work as not to burn out compressor,may just need little top up of gas,doing them regular just now with wethear like this hope this helps

been advising customers[local inde glasgow] to change belt kit and pump at 60k for two years now due some early failures costing a lot,saves on labour both at one time,and peace of mind for 60k also do air con work and diagnostics codes read cleared and service work for any one local cheers graham

filter under pass side glove box slides out no tools needed if blocked change or toss cheers

what do you mean,the actual r134a gas,oil in pump,you cant drain the r134a you need to recover it by special tools,or get a heafty fine for damaging ozone,why do you need to drain ?cheers:confused:

:outch ! i like it