CheeseMike

Problem was in interference on CAN bus - once I terminated old cut comfort CAN and run new CAN wires to drivetrain CAN it started working.

ok... had to find solution by myself, its working now.

Hello there, i went through the whole topic regarding PDC retrofit but I am getting different results than what I should expect according to the hints here. My situation - I had old PDC unit with part number 1Z0919283B I want to add front parking sensors as well. So I bought front sensor loom, new bumper with sensors already fitted, button, speaker and fitted it into a car. New unit is 1Z0919475G and here comes the trouble - no matter how i try, no matter what i do, i cannot make car communicating with this unit. Tryed coding both addresses, tryed using connection to the actual CAN, then run new wires to the new CAN - no change. Then I swapped with new gateway - my actual one is 1K0907530Q, I swapped it with 7N0907530C also no change. When i use old can connections, it just downt want to work (no id of unit on diagnostics) when i switch to new can, i get multiple random errors from other units and also engine fan starts spinning. So my question is - what is a correct combination of this unit, gateway and CAN connection??

Hello there, I got a MFSW from Octavia3, changed the buttons and loom from Superb2 FL and replaced my flip ring from 5K0953569C to 5K0953569AL Coding was performed but buttons do not work. They light up green but do not react to anything. Only thing working when ticking LIN2.0 Concern vehicles is Volume Up but by pressing the volume (mute) button. I tryed coding of LIN1.3 as well but everytime i get coding rejected. Any ideas what can be wrong? I have no error in ECU, dash, BCM, gateway, anywhere...

thank you my friend After few years driving in VW im glad to be back driving my good old Superb

Hello there, I have quite a complicated issue (i think... maybe somebody would tell me its really easy fix...) In my Superb 2 2012 with Skoda sound system I originally had Columbus navigation. Few days ago, it got stolen... 😞 Now I put there RNS310 (since i do not use navigation or play DVDs at all, so it does not matter). Everything was fine... until today when I fitted new bluetooth unit with number 7P6035730N because i would like to get bluetooth streaming option. Now problems begin. When unit is coded without media streaming, I get only error with microphone on diagnostics it say "microphone - open circuit" Then, when i code it for media streaming, media streming works but plays just from the right side and I get error "9457427 - Left audio channel for speech/telephone B104F 13 [009] - Short to GND " Is it coding or wiring issue? Can anybody help me what should i do to fix it please?

Hey there Since I lost my last email and account, Im here again. Nowdays i amd riving a superb 2 2012 which i would like to get some knowledge about and also share my actual knowledge with others. Hope I would be helpful here.