J_R

Hi Thanks for this - Not seen these options in an adaptation menu or similar before but have now found the following in the "blocklist" so will "fiddle" when car back! Car in for minor warranty repairs so will be a few days before checking. Wil lalso try the AM setting as would really like longwave radio when in Europe! I use VCDS for all work - what is the platform you are using there please? John Here are the only entries:- ENG248436-ENG248497-function_configuration_radio-AF persistent ENG248436-ENG248498-function_configuration_radio-af_hmi_switch_default_value On ENG248436-ENG248500-function_configuration_radio-AM_disable activated ENG248436-ENG248501-function_configuration_radio-am_fm_dab_antenna not activated ENG248436-ENG248502-function_configuration_radio-am_hd_hmi_switch_default_value not activated ENG248436-ENG248508-function_configuration_radio-band_settings_am_tuner EU_RdW ENG248436-ENG248509-function_configuration_radio-band_settings_dab_tuner_band_1 EU_Band_III-N ENG248436-ENG248510-function_configuration_radio-band_settings_fm_tuner EU_RdW ENG248436-ENG248633-function_configuration_radio-DAB_Alarm_Announcement activated ENG248436-ENG248634-function_configuration_radio-dab_mode_antenna_mode_1 activated ENG248436-ENG248641-function_configuration_radio-drm_plus_fm Deactivated ENG248436-ENG248642-function_configuration_radio-drm30_mf Deactivated ENG248436-ENG248683-function_configuration_radio-FM_Antenna available. ENG248436-ENG248684-function_configuration_radio-fm_hd_hmi_switch_default_value not activated ENG248436-ENG248685-function_configuration_radio-FM_PTY31_Alarm OFF ENG248436-ENG248686-function_configuration_radio-fm_radio_profiles not_valid ENG248436-ENG248697-function_configuration_radio-HD_FM_Antenna_Mode AM_FM_ANT ENG248436-ENG152533-function_configuration_radio-Hybrid_Radio_additional_online_data Deactivated ENG248436-ENG152534-function_configuration_radio-Hybrid_Radio_Range_Extender Deactivated ENG248436-ENG248767-function_configuration_radio-multiple_entry_switch On ENG248436-ENG152553-function_configuration_radio-online_radio native_hmi_only ENG248436-ENG248793-function_configuration_radio-PI_ignore OFF ENG248436-ENG286264-function_configuration_radio-PTy switch default value OFF ENG248436-ENG286265-function_configuration_radio-PTy_switch_visibility OFF ENG248436-ENG248797-function_configuration_radio-Radio_Text_Plus activated ENG248436-ENG248798-function_configuration_radio-rds_hmi_switch_default_value On ENG248436-ENG248799-function_configuration_radio-rds_hmi_switch_visibility OFF ENG248436-ENG248812-function_configuration_radio-SDARS_band_activation Deactivated ENG248436-ENG249938-function_configuration_radio-SDARS_type SAT_only ENG248436-ENG126993-function_configuration_radio-Station_Logo_DB_Mode 1

I see plenty of issues regarding poor DAB because of rear windscreen isues on KAROQ 2023 model. However, I find the quality of DAB awful and the radio has the bad habit of changing from FM to DAB on its own, even if the "select fm" is ticked in the advance section.......It keeps going back. Even if I store the FM station in memory, next time I power up the memory has changed to the DAB station. I use VCDS a lot and .am used to adjusting the car's settings, but can not find anything for this. probably easiest way is to disconnect the DAB aerial and use a resistor to provide the correct impedence but act as a short circuit for signal reception. However, whaving not yet dismantled the back of this new car (!!) I am not sure which aerial it is on the rear window....anyone know for certaion? The best solution would be to remove the DAB aerial input to the radip receiver and short that input, but again, even with the full workshop manual here, I can not find the connector or pin numbers......any answers please John Somerset UK

Many thanks found these but they seem to be the earlier Karoq, not the "revamped" model John

Hi, New to here. Have a 2021 Kodiaq DSG and managed to find wiring drawings and service manual. Now taking delivery of a new Karoq SEL in May and looking for drawings and manual for this car. Interior and panels looks identical tpo Kodiaq and guess wiring colours etc may be almost the same. I like modifying things (fiddling) and hate things like the auto start/stop and on the Kodiaq the adaptive cruise control. Sorted the start stop by taking a feed from the fusbox "ignition on" relay and using that to trigger a small circuit I built that then pulses the start/stop switch. Wonderful. Always off. Needed more usb sockets and ones that powered down with ignition, as well as extra 12v sockets, gps power etc. manged to grab a feed off of the interior lighting circuit and used that to drive a relay wired into all the sockets. perfect. Have to do same to Karoq - hence need for wiring drawings to save experimenting! Any help gratefully accepted as don't have access to the Skoda sytem John UK P.S. Anyone have the code to put in the EMU to turn off adaptive cruise and make it normal? It is DANGEROUS as it is, especially in Europe trying to brake when overaking. I have tools to access all the modules etc. just need to know location of code.