sparkieboy29

Hi all im new to the forum after just buying a 1.6 roomster for a run around, within a the first week the following problem has flagged up on VCDS. ive removed the oxygen sensor in the engine bay bought some of wynns dpf cleaner used a pressurized container to fill the dpf up,im getting lots of foam out of the back exhaust with lots of muck but it will not regen or rev beyond 2500 revs and still coming up with the following info,if anyone who has experience of this any advice would be greatly appreciated Saturday,04,March,2023,20:40:45:00009 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 20.4.2.0 (x64) Data version: 20200730 DS317.0 www.Ross-Tech.com VIN: TMBPL65J6C7007833 License Plate: Mileage: 129220km-80293mi Repair Order: Address 01: Engine Labels: 03L-906-023-CAY.clb Control Module Part Number: 03L 906 023 LN HW: 03L 906 023 LK Component and/or Version: R4 1.6l TDI H33 9983 Software Coding: 00114016000500080000 Work Shop Code: WSC 13765 031 00123 ASAM Dataset: EV_ECM16TDI02103L906023LN 003017 (SK25) ROD: EV_ECM16TDI02103L906023LK_SK25.rod VCID: 7DF14CF3ECF1676E78-8028 1 Fault Found: 16848 - Diesel Particulate Filter P2458 00 [173] - Regeneration Duration MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Mileage: 129223 km Date: 2023.03.04 Time: 20:31:35 Engine speed: 781.75 /min Normed load value: 16.5 % Vehicle speed: 0 km/h Coolant temperature: 91 °C Intake air temperature: 29 °C Ambient air pressure: 1010 mbar Voltage terminal 30: 14.005 V Unlearning counter according OBD: 40 Particle filter: soot mass measured-MASS_SOOT_PHY_PF: -1.28 g Particle filter: soot mass calculated-MASS_SOOT_SIM_PF: 10.56 g Particle filter kilometers since last regeneration_1-DIST_RGN_ENVD_H: 340 km Zähler der Regenerationszeit des Partikelfilters-T_INT_RGN_ACT_INI_PF_ENVD_H: 12596.0189 s Particle filter: difference pressure-DIP_PF: 0.00 hPa Particle filter: offset for differential press.-DIP_PF_AD[0]: -1.58 hPa Service regeneration: Release conditions 3-FRF_STATE_RGN: 1 Readiness: 1 1 X X X