kucharp
Finding my way
-
Joined
-
Last visited
-
Could you check what you have set in the ABS unit in the adaptation on the channel? "Tyre pressure control monitor ing error injection"
-
Curious on which system are the software differences. Maybe someone knows to look in ABS, BCM or maybe in IC?
-
Ambition
-
I wonder how it activates as there is no LED in the right lamp physically? It's magic?😉
-
In the Passat B8 from 2021, it displays information about the loss of air in exactly which wheel. And in Skoda Fabi from 2023, in the case of air loss, it only shows general information to check the air in the wheels, it does not say exactly which wheel is missing air. PLEASE NOTE that this Passat does not have sensors in the wheels, I checked and I also do not have a pressure reading. In both cars, the information comes from the ABS based on wheel rotation. Therefore, I have a question, what and where should be changed in the adaptation or coding in Skoda so that it informs exactly in which wheel there is a loss of air?
-
But I want to know how it is originally connected. I have a diagram from my Fabia but there is no power there. The way Pedro hooked it up is wrong because the camera is powered all the time and should only work when reverse gear is engaged.
-
Do you have a diagram of how the original camera is connected? I know where it is connected to the radio, but where does the power to the cameras come from?
-
Today I checked and there are no LEDs in the second light
-
Do you know what camera system the Fabia's monitor supports PAL or NTSC? I wonder if this camera will work? Pal
-
I wanted to connect the DVR camera and the cigarette lighter socket has a constant power supply and when I connected it to the USB C socket, after turning off the power, the camera starts up in a loop every now and then. All in all, whatever is connected to the USB C socket, after turning off the power, the voltage still appears there cyclically, accompanied by this ticking in the clock
-
Which cable from Ali to disable start stop will be suitable for Mk4? Will it fit Scala or any other model?
