Skip to content

Geebe

New here
  • Joined

  • Last visited

  1. No definitely was the throttle body, the electrics inside were fried. New one fitted and all good
  2. Turned out to be a dodgy throttle body, new one fitted and issue gone
  3. Can someone please help with the po122 Throttle Pedal Position Sensor/Switch (TPS) A Circuit Low Input. i had a genuine pedal fitted to my Octavia vrs cr at the start of the year, all has been going fine but a few weeks ago I had the po122 code pop up, sure it’s not the pedal, it seems to drive ok. I checked connection on the throttle body and that was oily so took off the side of the throttle body and cleared the oil yet still have the issue, it’s intermittent and usually flashes up the glow plug, sometimes the engine management light. can anyone tell me if the throttle body is the issue or should I be looking elsewhere? Cheers
  4. Should also mention it’s a 2.0 tdi cr vrs
  5. Hi, I kept getting the glow light flashing, plug my tool in and got a po122 code. I replaced the pedal position sensor earlier in the year and it’s been fine. It drives ok but keep getting the flashing light and engine management on occasions. I unplugged the connection to the throttle body and found it was full of oil, I cleaned it up and flashing stopped for a few miles but keeps coming back. I took the side off the throttle body and drained the oil as it was full but still having the issue. Could this be the electrics faulty because of the oil? Surely it can’t be the pedal as it’s a genuine from skoda

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.