I have two errors: AFS and start stop.
Any suggestion on best way to approach this?
I'm going to disconnect the modules on the headlight, so need to take off the front bumper.
Can I check the resistance of the Neutral Gear Sensor or Gear Reconition Sensor?
Attached are the error files:
-------------------------------------------------------------------------------
Address 55: Headlight Range Labels: 5M0-907-357-V2.clb
Part No SW: 5M0 907 357 C HW: 5M0 907 357 C
Component: AFS-Steuergeraet 0148
Revision: 00H04000 Serial number:
Coding: 1377095
Shop #: WSC 33361 790 00999
VCID: 34321581523CB87A8B3-8060
Subsystem 1 - Part No: ID-L fehlt Labels: ID-55-01.CLB
Component: AFS-Lst.-Modul l ....
Coding: 00000255
Subsystem 2 - Part No: 7L6 941 329 B Labels: 3D0-941-329.CLB
Component: AFS-Lst.-Modul r 0005
Coding: 00000021
6 Faults Found:
02988 - Left-Hand/Right-Hand Traffic Switchover Active
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 251
Mileage: 297238 km
Time Indication: 0
Date: 2019.03.07.
Time: 00:31:23
Freeze Frame:
Voltage: 11.50 V
Speed: 0.0 km/h
ABS 1
02233 - Left Headlight Power Output Stage (J667)
004 - No Signal/Communication - MIL ON
Freeze Frame:
Fault Status: 11100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 251
Mileage: 297238 km
Time Indication: 0
Date: 2019.03.07.
Time: 00:31:23
Freeze Frame:
Voltage: 11.50 V
Speed: 0.0 km/h
ABS 1
01042 - Control Module; Not Coded
000 - - - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 251
Time Indication: 0
Freeze Frame:
Invalid
Invalid
Invalid
02656 - Power Output Stage for Left Headlight (J667); Not Coded
000 - - - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 251
Time Indication: 0
Freeze Frame:
Invalid
Invalid
Invalid
02657 - Power Output Stage for Right Headlight (J668); Not Coded
000 - - - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 251
Time Indication: 0
Freeze Frame:
Invalid
Invalid
Invalid
01539 - Headlights Not Adjusted
005 - No or Incorrect Basic Setting / Adaptation - MIL ON
Freeze Frame:
Fault Status: 11100101
Fault Priority: 3
Fault Frequency: 1
Reset counter: 251
Time Indication: 0
Freeze Frame:
Invalid
Invalid
Invalid
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Address 01: Engine (J623-CFFB) Labels: None
Part No SW: 03L 906 018 MH HW: 03L 906 018 MH
Component: R4 2.0l TDI H27 9980
Revision: 41H27--- Serial number: CVN: 5CB0B100
Coding: 00190032042501080000
Shop #: WSC 00552 941 00000
ASAM Dataset: EV_ECM20TDI01103L906018MH 003010
ROD: EV_ECM20TDI01103L906018MH.rod
VCID: 7CA2FDA1366CB03A033-8028
VINID: 91D49B5470E41932401881051850CEF4CF
2 Faults Found:
16703 - Gear Reconition Sensor
P181C 00 [00100111] - Implausbile Signal
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 297238 km
Date: 2024.10.14.
Time: 00:31:26
Engine RPM: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 56 °C
Intake air temperature: 25 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 11.620 V
Unlearning counter according OBD: 40
Neutral position sensor: current transmission angle: 20.00 °
Neutral position sensor: adapted transmission angle: 1.20 °
Adaptation status of neutral position sensor-Bits 0-7: 60
Transmission neutral position sensor voltage: 0 mV
Neutral position sensor: upper adaptation value: 2760 mV
Neutral position sensor: lower adaptation value: 1320 mV
10092 - Neutral Gear Sensor
P15A0 00 [00100111] - Electrical Malfunction
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 297238 km
Date: 2024.10.14.
Time: 00:31:26
Engine RPM: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 56 °C
Intake air temperature: 25 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 11.600 V
Unlearning counter according OBD: 40
Neutral position sensor: current transmission angle: -14.00 °
Neutral position sensor: adapted transmission angle: 1.20 °
Adaptation status of neutral position sensor-Bits 0-7: 60
Transmission neutral position sensor voltage: 0 mV
Neutral position sensor: upper adaptation value: 2760 mV
Neutral position sensor: lower adaptation value: 1320 mV
Readiness: 0 0 0 0 1
-------------------------------------------------------------------------------