-
Posts
254 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Everything posted by nutztoys
-
Hi, Is retro fitting electric seats with memory a straight forward job? Is the electric wires/plugs for the standart seat enough or does it require further wiring and perhaps some VCDS? Bgds Dan
-
Hi Guys, Fitting a RS bumper to a "normal" Octavia, is it a straight fit or does it require replacements of a lot of parts? Anyone who has done it? Bgds Dan
-
No the slider switch seems to work and are set correctly.
-
Hi Guys, My interiur light doesn´t turn off when I close the door. I´m suspecting a faulty lightswitch, but where is it located? Is it located at the end of the black door hingde? Could it be something else than the switch? Bgds Dan
-
Hi Guys, I´m thinking about fitting a steering Wheel from Golf 6 GTI , without MFS. Is it a straight swap or are there complications? My Fabia is from september 2007. bgds Dan
-
I run 7½x17 ET35 without any problems on wintertyres. My summer tires is 7x17 ET38 and ET35 shouldn´t be a problem.
-
Thanks..It from september 2007. Engine code: BZG 1.2 12VBgds Dan
-
Hi guys, Does anyone know the torque setting for the 3 nuts connecting the front part of the exhaust to the cat? It´s 3 nuts in total. Bgds Dan
-
Looks really good, also the flared arches... Bgds Dan
-
Hi guys, Inspired from this thread: http://www.briskoda.net/forums/topic/255486-bumper-mod/ i started thinking what color change would look great. If you stay OEM, i think the green or the tangerine would look nice in matte. What do you think? If you master photoshop, do get carried away...;-) Bgds Dan
-
Has anyone concidered the possibility that the are there for a reason........
-
If an original bonnet is difficult to get, could you find the vents and fit them to your own bonnet? There is a lot of after market bonnet vents out there, but most of them look like crap... Would really want the original vents or ones similar. Bgds Dan
-
Very impressive...looks fantastic. How did you solve the issue with water through the vents? Bgds Dan
-
Hi guys, My driverseat is starting to show signs of wear on the left side on the side. Can you get the seatcover from Skoda or do I need a new seat/back? I only need the backcover. Any idea how much it is and how difficult itis to change? Bgds Dan
-
1.2 12v Fabia 2- engine idle 'flutter'
nutztoys replied to aquaseller2004's topic in Skoda Fabia Mk II (2007-2014)
Hi, This just happened to me today. Was driving home and noticed it when I stopped for red light, after about 20 min. driving. Didn´t notice it when I was driving. It was quite hot today, so not a cold weather issue.AC was not on. I parked the car, turned the engine off for approx. 10 min and started it again. After this no problems.. Bgds Dan -
Clean the inside everytime, also the backside of the spokes. With TD Prorace3 it´s easy, plenty of room.
-
My choise too.. Just got them and are very pleased. Are also very quiet.. Bgds Dan
-
Will these fit the FabiaII vRS?
nutztoys replied to ChrisRs's topic in Skoda Fabia Mk II (2007-2014)
I run 7.5x17, ET 35 as my winter setup. RS6 reps. No problemo. Bgds Dan -
I fitted H&R springs and that was agreat improvement in handling. Reduced bodyroll and the up and down movement alot. Then after a while I fitted the Whiteline, and the car transformed totally...( still a Fabia though....). It corners much more flat and fills you with confidence though corners. The best money spend on the car..... I have in meanwhile fitted Koni adjusable dampers to complete the suspention. Since this is the only ARB I have tried, I can´t say if it is better or worse than others, but it is a good ARB. Bgds Dan
-
Otherwise I think white would look great on green.
-
Thanks guys Yes it is Team Dynamics ProRace 3. 7x17, ET38. Layed them on the scale at work, and it said 9 kg. The tyre was 8.2 kg. Have only driven about 40 km but the noise reduction compared to the Bridgestone Turenza is amazing.Very quiet.. The grip also seems good. Bgds Dan
-
-
But the lid is still attached to the dash..... Bgds Dan
-
Thanks alot Irfant, very helpfull...