hermanlol123

Yes. Tried measuring the power again and saw that it was lower than 12v but not 0 so opened the wiring harness between the body and bootlid and saw that a cable was bent not completely off. My wiper motor was also dead so had to change the motor and repair the cable

Hello I´ve noticed for a while know that when using the auxiliary heater it doesn´t get hot in the car or the engine. I got no fault codes on it and tried with the remote and timer in the car. It blows from the vent in the car but doesn't get hot at all. Tried leaving it on for 30 minutes as most but still nothing. Has anyone had any problem with this? I have heating choosen in the ¨car settings¨

Hello. I'm going to replace my DMF in my superb 2012. It's got a 2.0 TDI with the DQ250 transmission. I wonder if I need to empty the oil in the transmission before I do it? I did an oil change on the transmission about a year ago. Also has anyone got a pdf or something on all the torque required (Fly wheel bolts, Transmission to block bolts, etc) I have looked online but gotten different answers

I've tried lubricated the motor now but It's still making this noise with ignition on and when starting the motor it makes 3 turns. I've added a audio file of the sound it makes. I also did measure the contact once again and now I can get power from 2 of the 4 pins. One is earth/neutral so assuming. I get constant 12 volt from 1 pin and 12 volt when the washer fluid is being pushed. Is the last pin supposed to get 12 volt when I turn on the wiper? I'm feeling a bit lost as its moves when starting the car but gets no power when the lever is being pushed. ljudspår Skoda.mp3

Sounds like that could be a think. Reversed parked now so can see tomorrow if that happened.

I thought of something like that but it seems wierd that it does it as soon as I start the car. I dont have the lever "toggled" on for thr rear wiper

Once again I have tried to fix it but without any luck. Now when I it all back togheter it made a sound when I turned on the ignition like it was stuck. Then when I turned on the car it made 3 "waves" and stopped a little bit further down. This happend once again when I restarted the car. Any one got some ideas what could be wrong now?

Made an extra ground and it still doesn't work. Starting to lose my mind.

Someone who still has this guide, cause the dropbox is 10 years old?

There is power to the connector that is going in the motor. Both 12v and 12v when lever is used. So I think that it could be a grounding issue. Gonna try and make extra ground wore somehow to see if it's the issue

Power is coming to the connector. Tried putting 12v on the motor and it worked. Put everything back and the wiper worked one time, restarted the car and the motor made a sound like its trying to wipe but nothing happened. Now its completely silent. Any ideas?

No warning in the dashboard about the boot not closing but still tried på put a new match in, still no rear wiper is working

Hello I just bought a Superb 2012 and the rear wiper doesn't work. I have power to the connector and tried installing a new motor, but it still doesn't work any ideas?