Kalkveien

All contacts on the connector worked as they should, so that means unfortunately that the ABS control unit is defective?

Unfortunately all fuses were intact. Does anyone know which pins on the abs connector can be measured?

TMBJF75L1B6013810 🙂

Thanks for all the tips so far Unfortunately the problem is not solved yet. Error code reader cannot connect to abs module, considering buying ross tech VCDS reader.... Yeti has just been standing since the error appeared..... Planning a slightly longer trip in the summer of 2026 (15,000 km) so need the car in top shape

Hi Have got a ABS fault in my Yeti and seeking some advise (sorry for my bad english, from Norway) After sitting all winter it startet up an run fine a couple of days, but after a while at idle, ABS fault came up. EPC, ABS and brake warning light i dash, also have problem with instrumentscluster lights and fuel gauge Faultcodes 01316 Brake control module and U012100 Lost communication with anti-lock brake system ABS control module There seems to be power in the conector to the ABS module in engine compartment, and looks like no gunk on any connector Any advice on this matter? 2010 Yeti 1.2 TSI