ChrisT3

Thank you for the suggestion! I coded my headlights to LED, and now they work perfectly. These are the codes I used, in case someone is interested. I used OBDeleven Navigate to adaptation in the central electrics module to find these Leuchte-sets. Leuchte6ABL LC5 (left-side low beam) and Leuchte7ABL RB1 (right-side low beam) Changing these settings Lasttyp: 11 Abblendlicht > 5 LED Abblendlicht Dimmwert AB: 100 > 127

Hi! I ran into a problem, please help. I rebuilt my headlights from halogen to Bi-LED. I swapped out both the low and high beams, and after I turn on my high beams, the low beams start to rapidly flash. It doesn’t happen every time, only sometimes, so I thought it might be a loose connection somewhere. But I wiggled all the cables and everything works fine when I’m standing still. After a few seconds of flashing, I get an error for both headlights. Fun fact: if I use the lever to flash the high beams and hold it, everything works fine. The issue only appears when I turn them on normally. After that, I thought it could be the CANbus, so I put a resistor in front of the low beams — the problem still happens, but now it doesn’t show any error anymore. Then I put a resistor in front of the high beams, and it started flashing the low beams without even turning on the high beams, so I removed them. Now I don’t know if the projectors are faulty or if the CANbus system has some kind of compatibility issue and needs to be coded. Car: Octavia mk3 FL 2018 Thank you for your help! c7e1dd69-3259-4564-b335-c361d4da624e.mp4

Hey everyone! Just joined the forum and wanted to introduce myself. I’m a big fan of car modding and currently drive a Skoda Octavia MK3 FL. I’ve been slowly customizing it. Always looking to learn new things, share ideas, and check out other members builds. Excited to be part of the community and to see what everyone’s working on!