The Elroq was only released in October in AU and we bought the first one from the dealer after driving a pre release vehicle back in July Wife's new Elroq 130 2 weeks old has an "interesting problem" Love the car but the Au importers appear to have stripped out some feature to maybe save a few $$(Of course not, would they?) We have a 13kw solar array currently and 20kw battery bank about to be installed however currently using the supplied 2.4kw wall charger 240VAC @10A The problem: We have been forced to have smart electrickery meter installed and we here in the Gold coast and most of SE Queensland have 4 electricity tariffs, the cheapest is from 10PM through until 08AM. We're oldies so staying up till 10 pm is an issue as we are up typically at 5 or 6 A M, so I tried using a mains timer. Does not charge! Plug in supplied Skoda charger, set the timer for 10.05PM, power on. At 10.05 the timer activates, the charger shows one LED for power but no output. The Elroq port is red. Test: Daytime plug in and power on.... Charger cycles and begins charging, slow flash at both the charger and Elroq port. All OK. Turn off the mains, wait 10 minutes or several hours, turn on the mains again and zero output. So the only way to charge appears to be manually inserting the charge plug and applying power within a minute or so, and a delay stops it. Does anyone know a way around this? Skoda Australia simply say take back to the dealer however long discussions with the dealer have given me zero hope, they have no idea and refer me back to Skoda AU.