k00ks

I really appreciate the update and the legwork on this! I am not going to proceed as there are SW version limits and a risk of bricking unless specific versions are used. Availability of versions (example SW0469) is limited, so main dealer looks like the best approach. Thank you!

Apologies, I should have been clearer... My SWING (Physical button) headset is currently running... SW Train MEN3_EU_SK370_P9305P, MU SW 0463 I have I have MEN3_EU_SK370_P2345L and MEN3_EU_SK370_P3355L_1800 downloaded and on USB. (From mib-helper and mibsolution) These are unzipped in their respective folders on the USB. The car seems to be able to read the folders on the USB, but it does not do any update. A stepped upgrade may be required. If I am on P9305P - Is P2345L or P3355L a downgrade?

I had an issue with the Drivers seat belt retract in my 2020 ('19-'20 model?) Scala. Skoda dealer quoted E400 to replace the rewind - That was not happening. To figure the problem I pulled the BPillar apart - hopefully this is easy to follow with the attached pics. There is no airbag risk with this, but do be careful. Ahead of this, slide the seat forward as far as you can. 1. Use a pointed tool to prise the Airbag badge - You will lose the tip off a Stanley knife if you lever, do this with care so as not to scratch the trim. 2. Use a magnetised Torx to remove the bolt to avoid dropping into the pillar. I used an old Hard drive magnet. Easy does it, think 'Operation'. 3. Grip the bottom of the trim at either side reaching under the door seal. Pull firmly. There are 2 metal clips into the car body and 2 plastic clips into the lower trim. 4. With the lower part out, ensuring the adjust mechanism is disengaged, pull the trim down. You now have access to the seat belt height adjust. Refitting is a reversal... Insert upper trim tongues. Ensure you align the adjust mechanism (pictured). Ensure 2 plastic and 2 metal clips are aligned, press firmly into place. Reinsert Torx (don't forget Magnet!) Replace Airbag badge. My issue was unresolved, I need to have a go again. The issue I have is the pivot - it swivels forward but does not sit back which inhibits retract. Hopefully this is useful to someone.

I know the thread title is for Bolero, but I have Swing radio (Physical buttons) in a 2020 Scala. Is a f/w update possible with this? Currently... SW Train MEN3_EU_SK370_P9305P MU SW 0463 I have MEN3_EU_SK370_P2345L and MEN3_EU_SK370_P3355L_1800 I have puzzled folders on USBC - USBA adapter but radio refuses to use the above. SWMBO and I are in the Pixel/Samsung camp so ongoing connectivity issues. Thanks in advance

It was a B-pillar teardown for a 2019 model Scala - Sample attached. I was having a belt rewind issue, now resolved. I could not find this on the interweb or on this site for this model Attempting to post I type a few characters in the subject, then the page hung on Win11, in Chrome and FF. Seems to work from my Android, but I am buried now so can't help troubleshoot any further. Thanks for the responses.

Hello, I tried to Post a B-Pillar teardown with pics but this forum crashes both Chrome and Firefox. I cannot fond where it is possible to delete my account. Please delete my account for me. Thank you