sebdan
-
Posts
5 -
Joined
-
Last visited
sebdan's Achievements
-
Engine management light has come on - what next?
sebdan replied to matthew_h's topic in Skoda Octavia Mk II (2004 - 2013)
I had it happen on my fabia 1.4tdi it turned out to be the engine cover had rubbed on the vacuum pipe to the egr valve and cut a slit into it, piece of pipe from local garage £3 did the trick and I bought a fault code reader from ebay £25, all in all cost far less the 30mins on a main dealer machine. -
MkII
-
Hi Group, I phoned my Skoda dealer to enquire about glow plugs and was told that there are 2 types available (slightly different measurements 27 or 30, he didn't know if that was millimetres of what?) for my 1.4 Tdi Fabia based on my chassis no. He didn't know weather they were metal or ceramic and said they were not stock items and the only way of knowing which plugs they were was to remove one and have a look. My elsawin software says there are either metal or ceramic too but gives no indication as to how one would know. I would appreceate advice as to how to find out without removing of possible. Thanks.
-
I have a fabia ll purchased nov 2007 and my windows just started playing up. I just have front electric windows. Faults as follows:- Passenger side one touch not working. passenger switch on drivers side not working at all but very occasional start to work and stop again. Driver side one touch not working 90% of time. Have tried all the reset techniques which seem to start driver one touch working but then stops again very quickly. Have rung dealer and as I live a distance away am going to try and call in when in the area so they can put it on diagnostic machine. Any ideas?
-
I have a fabia ll purchased nov 2007 and my windows just started playing up. I just have front electric windows. Faults as follows:- Passenger side one touch not working. passenger switch on drivers side not working at all but very occasional start to work and stop again. Driver side one touch not working 90% of time. Have tried all the reset techniques which seem to start driver one touch working but then stops again very quickly. Have rung dealer and as I live a distance away am going to try and call in when in the area so they can put it on diagnostic machine. Any ideas?