skodabrian

Thanks Guys I will give the wd40 a go tomorrow

Hi Guys The wife put her fabia in the garage before we went on holiday came back and the battery had went dead no problem i thought i will just give it a charge Went to open the drivers door and it was locked put the key in the lock it won't go right in so i can't get into the car to open the bonnet Can anybody help Is there something i am missing I tried all of the 3 keys but all the same is there a easy way to get under the bonnet ?? any help would be great thanks

Can anybody help with this ???????

Hi Guys could anybody tell me if part number 6Q0 423 155R electric power steering pump of a 9n style polo will fit a 2001 fabia 100 pd thanks

yes its a strange one The brakes were making a squealing noise about 3 months ago so i had taken them off and cleaned them and put them back on and the noise went away when i had them off i noticed they would be needing changed in the near future So this was what i was doing i took the disc off also to have a better look because i could not get how it stripped if you put the slider in from the right size it just wobbles in the hole anyway off to the breakers tomorrow for another hub

Hi Ken they came out ok but you can just push then in now it looks like the thread have stripped and it seems like i will now have to find a new hub or try and re cut the threads but probably best with another hub

Hi Guys I went to do my sisters front pads tonight and i have found a problem which i hope there is a easy solution for I un screwed the 2 brake sliders they came out with no problem but when i went to put them back in they won't tighten It seems like the thread in the hub has disintegrated has anybody had this issue Is there a easy fix or is it a new hub thanks guys the car is a 2001 fabia tdi 100 pd

Any thoughts guys ??????

Looking for a wee bit more help guys I fitted a new sensor today and looked at the old sensor somebody had already changed it at some point but tied it up with cable ties and not done it right so 2 bits of the protective coating had worn away and the black wire was worn threw until there is not copper wire Also the brown wire has worn threw just to the copper core Anyway put the new sensor in and still have the same issue no power steering and the light is still on Could the brown wire which is power i would think touched something and caused something to blow in the pump or is there a fuse somewhere ?????? Or could anybody help me out that has a vag com unit close to Fakirk any help would be appreciated thanks

Thanks for the advice guys

Yes thanks mate Done a bit of searching and i think i will just stick with 17's

Hi Guys I have been offered a set of golf r32 wheels 18 inch 225/40/18 I am going to be lowering the car on lowering springs only will there be any clearance issues or should i stay clear of 18 inch alloys Thanks for any advice given

Thanks Catson

Thanks Mate I am going to have a look at the car at the weekend and check the wiring to the sensor and check for corrosion in the plug just incase water has got in and also the earth that Lummox says And if all looks ok maybe as you say it possibly might need to be a new pump would it be a big job to transfer my pump off the vrs into her car just to check if it is the pump ?????

Thanks i will give that a check too