chr

Hi everyone, I kindly ask for your help. Octavia 2, MY2009, 1.8TSI, DSG7. The car runs ok, but engine fault indicator is on. Running VCDS, I get this error: Address 01: Engine (CDA) Labels: 06J-907-115-CDA.clb Part No SW: 1Z0 907 115 F HW: 1Z0 907 115 F Component: 1.8l R4/4V TFSI 0020 Revision: AAH03--- Serial number: Coding: 0203000C24070160 Shop #: WSC 73430 790 00999 VCID: 3851E6254BA829DE769 1 Fault Found: 008200 - Intake Manifold Flap; Bank 1 P2008 - 000 - Electrical Malfunction Freeze Frame: Fault Status: 01100000 Fault Priority: 0 Fault Frequency: 1 Mileage: 94760 km Time Indication: 0 Date: 2112.14.24 Time: 19:50:27 Freeze Frame: RPM: 831 /min Load: 16.9 % Speed: 0.0 km/h Temperature: 64.0°C Temperature: 33.0°C Absolute Pres.: 1000.0 mbar Voltage: 13.843 V Readiness: 0110 0101 Any idea what this represent and how can I solve it?

Difficult to say what should be standard. Columbus is nice, but is completely useless in countries where a detailed map is not available yet. Heated windscreen is a must have in Norway for instance, but I'm not sure if drivers from Kuweit willl appreciate it so much. What I would like on the next Octavia: - Adaptive cruise control - Head-up display

New beta 907.0 available. Data Version 20090709. The last release is 805.4. Data Version 20090602.

Tear drop on rear wiper: 09-Central Electronics -> Byte 21 -> bit 4 set

New beta 904.0 available. Data Version 20090430.

Of course I have read the book. According to it, there are 2 ways of activating DRL, one as xxleeus said, the other using maxi-dot. The procedure with turn signal lever doesn't work and the maxi-dot does not have this option. I know from other romanian guys, they also got the car without DRL activated and it was activated later by the dealer using their VAS software. After that, an option in maxi-dot appear and it can be used to activate-deactivate DRL. I also can go to the dealer to fix this free of charge (as I have paid for DRL option), but I just want to do it myself. I hope next VCDS beta will have the Central Electronics documented and I will be able to activate the DRL myself. Until then, if anyone has access to VAS and could share what bytes and how do I have to modify, I will highly appreciate. Later edit: 09-Central Electronics -> Byte 15, bit 6 set, bit 7 set. This make a new option in maxi-dot for activate/deactivate DRL. I found out by asking somebody with DRL activated by the dealer, to share his coding. Then I have compared the codings and modified one by one the bytes that was different.

I also have a new Octavia facelift and central electronics are not documented. I am using a genuine Micro-CAN with VCDS 812.4 beta. Could anyone help me for activating day running lights? Attached is an auto-scan. Log-TMBBK61Z692032293.txt

Hello all, I have a new Octavia II facelift, 1.8TSI, DSG7, black. I am reading this forum since a month ago and today I decided to register. I want to thank you all for helping and sharing information. Regards Radu