SamVRS

Glad you are both ok!

Update: today the headlight jets seem to be activating on the 3rd screen wash again. Very confused, more investigation required! Update2: Seems to like 6 as a value, so ive increased it to 8 to see if that works. Interestingly it will always wash the headlights the first time.

I was searching Google for my part number (1K0 937 087 D) and found this forum thread: http://forums.fourtitude.com/showthread.php?5119415-Headlight-washer-adjustments Adaption channel 26 was enabled already, and it was set to 4 (so I guess every 4th wash). I have changed it to 99 and this seems to have solved the problem!

I am trying to solve this issue, every 3rd screen wash the headlamp washers activate, covering the car and everything around it, not to mention wasting so must screen wash! My 09 info is below, but I don't seem to be able to view the label file so am a bit stuck. Any ideas? Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb Part No SW: 1K0 937 087 D HW: 1K0 937 087 D Component: BCM PQ35 H 103 0575 Revision: 00103 AG Coding: 48180AB8F05BB1C040080080110011E4437000AE626D8560800440040000 Shop #: WSC 73430 790 00999 Part No: 1Z2 955 119 C Component: Wischer 28011 22 0601 Coding: 00D7B7 Part No: 1K0 955 559 AH Component: RLS 260110 05 54 0402 Coding: 0730ED Part No: 1Z0 951 171 Component: Innenraumuebe 008 5101 Part No: 1K8 951 605 Component: LIN BACKUP HO H09 9002

Just thought id say I have just done this mod on my FL Octy with Columbus and i'm very happy with the sound improvement! Thanks!

Put me down as a spectator, ta

Thanks to Hedge: 1Z0 035 815

Sorry if this has been asked before, but I couldn't find a post related it. I am trying to source the part number of the metal bracket that holds the bluetooth module under the seat in an Octavia Mk2 as shown in this pic: http://octavia-vrs.com/cms/images/bluetooth/Octy_II_Bluetooth_050_800x600.jpg If anyone does know it I would be very grateful. Edit: For an Octavia MK2

OFF - worst case im sure its possible to fabricate something to fill the holes?

I thought I'd give an update on this issue just in case anyone has the same problem (although it seems very rare). The problem got worse and worse to the point that the initialising screen could be up for 10 minutes at a time. Sometimes the unit would switch on with blank radio presets and even without sound on occasions. I believe a firmware re-load may have solved these problems but the unit it is under warranty so the dealer has replaced it.

Looks good Chris!

Hi guys, many thanks for your replies. This morning the unit seemed to continually reboot for about 5 minutes before finally starting up properly. There isn't a CD or DVD in it but I guess the unit thinks there is occasionally, usually in the mornings (temp related?). Ill take it to the dealer and get them to check it out as recommended.

My dealer (Basingstoke) has v6.1 so maybe try them?

Hi, I have a new VRS with Columbus factory fitted. Occasionally when starting the car, the screen displays "Initialising SWL" and it seems to reboot a couple of times before the usual Skoda welcome screen comes up. Is this normal, or is it likely to be some kind of software bug? Thanks, Sam

Thanks guys, I thought this was possible. I wanted to use the dealer so it didn't affect anything warranty wise, but I think ill give JKM a call...

I am taking delivery of my FL VRS CR170 hatch next week. I enquired with the dealer about getting Eibachs fitted but they say they wont fit. They claim they have spoken to Skoda UK and they say they only fit pre-FL models. This doesn't sound right to me? I have seen other photos of other FL VRS' on here with them fitted (albeit only estates) so it should be possible?

Sorry I'm going to have to pull out also due to a large repair bill :(

1. Gadgetman 2. Jon TDI 3. Favorit Ken 4. mikeholroyd 5. Avalon 6. richardsfavorit 7. SamVRS