ahmedtaha7

I finally managed to make it works... after several trials, i found out that pin#1 must be connected to live for the whole unit to works... If pin# 1 is connected to live & Pin#2 is connected to ground, the unit only dim... So i did connect pin#1 to switchable live signal, pin# 2 to the my halogen DRL -ve wire & pin#3 to the my halogen DRL +ve wire.. Now it works as it should be, while side lights/low beam is on, the LED DRL unit dim only... if the light switch is on OFF position, the LED DRL give full illumination. Thank you for your support

Do you think it can work directly from the battery using a DRL relay? like the below diagram? i don't want the dimming function, i just seek for the full illumination during daylight.. But what make me wonder is how its connected now to power from the existing Halogen DRL and it does not works!?

hello, my car is non VRS FL with OEM Halogen DRL, I have installed the VRS bumper with the OEM VRS LED DRL. I did wire the +ve & -ve wires of the Halogen DRL plug to PIN #3 & PIN # 2 of the LED DRL, but unfortunately it did not work at all... any Advise please? Thanks

Hello guys... Any advise on above enquiry?? Thanks Sent from my GT-N7100 using Tapatalk

Hi i did exactly the same you did , installed the new Octavia III to my Octavia II, same module as i already had MSFW in my previous wheel, But i am facing a problem and looking for some one to help, the horn is not working:( but everything else is fine , including the DSG shift which is added. I did the coding only for it.. Please support..

Hi Can anyone please send me the spanish file as meagupload is no longer working.!! I am very much interested fitting these footwell lighting so i need to know the part numbers of all required items and wiring. Thanks in advance

For the FL, please tell me how to Disassemble the conncetor that connects into the back of the switch (to terminat the wire in PIN 2)

Any update mate, i bought the switch and looking for the wires but where to connect and how to ?? I dont know even how to dismentle the black connector at the back of the switch to see the pins and know how to connect a wire to pin No. 2.

any update, me 2 wants to buy the auto switch and fit it in the octavia 2010 FL. please advice

+1, any body can cofirms that its only a matter of swapping the headlight switches (if the purple wire attached to the old one) & coding???

me 2 in jeddah

can we update to GSMIII or its a hardware issue?

is there any possibility to update the software to be a GSM III ?? , i do have the same problem u have