gigy

I was really concerned with this oil flowing into the intake till i discovered this thread through reference, did a quick mod in these lines and all is well now. Uploaded with ImageShack.us Uploaded with ImageShack.us

I am also going the same way. get only the xenon housing and use the phiips hid kit i have and wire it up. hope you didnt have any issue with the beam level in the default angle . I managed to get a wiring diagram of xenon based car and it shows two sensors in front and rear wheel area used for auto beam leveling. to get the canbus thing working will not be easy until a skoda mechanic is ready to mod it.

this is a picture of maf sensor removed for cleaning. i used a electro contact cleaner to clean it. Uploaded with ImageShack.us

Thank you very much for the information. did you manage the wiring diagram. will adding a additional wire to ecu help in the control. i hope the ecu remains the same since car with both type of headlight were sold together here other option is to install h4 projector into new normal headlight assembly

Hi all, Ii have a 2004 model 2.0L petrol Octavia which came factory fitted with h4 type headlight assembly. since its faded now i am planning replacement with the hid type available as oem. will this be a plug and play type of upgrade. CanIi expect the car to be wired for the xenon range control through canbus. Is there any way to check it out. Thanks [/img] Uploaded with ImageShack.us

Very useful guide for me, thanks

I have done up the install. only thing which needs finishing is the panel gaps in dash and bundling the wiring in boot. not using a head unit, its a direct connection of carputer to amplifier.

can anybody post picture of double din adapter for octavia? fitting the lcd is the last remaining thing now.

Nice install. I have just started on a carputer project, this will be a guide for me. Presently i am stuck up with finding double din adapter. my lcd is pre installed in a double din frame.