bethslad

See that's what I didn't want to hear Sent from my iPhone using Tapatalk

Ok so new calipers and carriers fitted, problems still there!! Brake pedal goes solid, front brakes seize on to the point where the car drags like f**k but if you stop and pump the brake pedal they come free. Completely stumped here and rather annoyed, think it might be time for a change Sent from my iPhone using Tapatalk

Went all the way in the end and have ordered new carriers for the front in the hope that this will cure it Thanks for the advice though, will let you all know if I get it cured Sent from my iPhone using Tapatalk

My bonnets a right mess with stone chips, thinking of having it resprayed Sent from my iPhone using Tapatalk

Had a similar problem when halfords fitted a parrot kit to my vrs, wires connected incorrectly, memory and power ( red and yellow ) wires the wrong way. Halfords don't get near my car now, I has to strip it out and fit it correctly myself, yes I know I should have just done it myself the first time but i thought it would be the easy option to get them to fit it as it was included in the price. Sent from my iPhone using Tapatalk

Thanks for taking the time to reply, I'll get that done. Cheers Steve I'll keep that in mind Sent from my iPhone using Tapatalk

Nice one it's always good to hear that someone has got their car back after it's been taken!! Sent from my iPhone using Tapatalk

My vrs Sent from my iPhone using Tapatalk

Hi all It's been a while since I've been on as I've been away working abroad for about a year, just after a little advice. My brother was looking after my car while I was away, well I say looking after very loosely. I had to put new calipers on the front and they have been fine for a few days but I took the wife for a drive today and the front brakes started playing funny buggers, they seemed to seize up, left one mainly and to the point where they were causing the car to "drag" but after stoping for a while they will free off and will be fine until brakes are used again. Could this be the carriers slide pins causing a problem as the carriers and pins are the original ones on the car. Any advice would be welcome Thanks muchly

hello all Im looking at getting a front splitter for my vrs, anyone know of anywhere to get one and the cost? Cheers

well i hav'nt opened the holes out when drilling the only problem is i dont have a rivet gun to take the size of the rivets needed so i was thinking about rivnuts, i have m8 size rivnuts but they seem to big. i was wondering if anyone had used rivnuts on the panel and if so then what size? Thanks again

Hi all so I've now taken the stupidly designed window regulator out after ordering and receiving the repair kit, im now having issues with putting the window runners back on and also re-attaching the inner panel, do i have to arse around with replacing rivets or can i put it all back together using another method, have gotten so ****ed off with this im.seriously thinking of getting shot of my vrs, any one that can help? cheers all

Ok cheers for that ill have a look and give it a go

Hello some idiot thought it would be a good idea to run into my vrs recently so I've had to renew one of the xenon headlights. the problem is now i have one new and one that looks dull so does anyone know where i can get a replacement lens or can it be polished up thanks