andybaz

Hi all, can the vag con system add/code immobiliser keys to the ecu system ?

Hi all, previous link locked, no problem, so stay away from, so can any one guide me to a legite area for data info, may be some where on this site that i have missed ? Cheers andy

HI all, not sure if this right area to put this, as per tittle, are these any good ? or shoudl i stay away, just after honest opinions, or is there anewer version i should be looking at ? Cheers andy

Hi all, any rc hobbyist here,looking to make contact with any one who can spary, shells are clear lexan painted from the inside, not with normal car paints though. Cheers for now Andy http://s631.photobucket.com/home/mcd_racer/allalbums

Hi all, Just putting the word out, so if local to chester - wrexham- buckley - mold - ruthin - flint - oswestry & surrounding area's etc and you require a light diagnosing drop us a pm, may be able to help. Cheers andy

Hi folks,update so far, used my new glow plug test tool, neat bit of kit, although i wouldnt pay the £90 +vat for one. All 4 plugs are good,forgot to take me multi meter, next stage is to check the feed supply bar across the topof the plugs to make sure there is actually voltage at all 4 and not just the suspected no2. Will let you know what the outcome is.

http://i631.photobucket.com/albums/uu40/mcd_racer/diagnostics/User008_01005004952.jpg Good morning all,not sure if this will work, screen shot from my scanner (snap on), ok,i need to do a physical check on glow plug number 2,supply voltage and bench glow test,also when my glow plug tester lands, a test in situ, with out having to disconnect any supply rails etc, that will be an interesting test. 18009 mentions terminal 30,i know this is a standard recognised relay pin, any views my friends, i cant see how the relay could give a single problem to a single glow plug. 1 last question: any one know the location of the glow glug relay so i can check supply's,earth and continuity checks ??? Cheers for your time folks, andy

Ok, update folks, not sure wether i can get snap on scans up on here,will try when have to, car is FABIA VRS 1.9TDI BLT eng and the code is not : P0627 Yep: its P0672 , dont shout,ionly going by what he told me, easy mistake 672- 627 As the plugs are new,fault cylinder 2,he is going to try a bench glow test on the plug and also swap position with plug 1, i also have on order a glow plug tester,here this week, test glow plugs in situ without disconnecting feeds etc etc, interested to see how it works Cleared the code,he is going to run the car until light comes backon and i have my new tester,then going to reread tosee what we can find. Will keep you posted. Cheers andy

Thats what my autodata book and code breaker book say off snap on,will report back with findings, dont spose you know the location of the relay,or whats the best source of data info,cheers andy

Hi,doin a job outside work , the guy has had a read an told code P0627 - glow plugs as the glow plug light kept coming up, so he replaced the glowplugs with checking the old or new ones before fitting. I told him P0627 does not relate to glow plugs, points towards fuel pump problems. Any one no of any common problems to look for,nipping round to the guys house tomorrow morning to read the system for myself to see what i can see. I have also discovered that a 'FLASHING GLOW PLUG LIGHT' common to the skoda range while driving can also relate to brake pedal switch problems. Any got any comments & views ? Will have more details tomorrow (engine size-year and model etc)

hello all, technician is my trade for Toyota,so hopefully be able to help others for some help for me . Joining the forum as i am getting a fare few skoda's to look after, and i have a s/o diagnostic machine, so if you want a fault code read an are local to me,give me a shout,all helping each other. Cheers for now,andy