Whizzler46

Looks like im taking it out and apart then, even if it is only to get my CDs out.

When the buttons are pressed to eject the cds the changer makes a few whirring noises, flashes the button on the front then does nothing.

Would this be better off in the ICE section?

The other day a few of the cds in the boot changer came up with cd error on the dash and wouldn't play. Plan was take em out give it a blow out to clear any dust and try again. However not only wont it play the cds it wont eject them either. Just makes a noise when i press eject then lights up all the buttons in turn and doesn't give em the cd. Any ideas?

Am i right in assuming this picture is showing a 8J rim on about final ET33 215/40r18? Just sizing up some winter alloys and seeing if 8.5j on ET35 215/35r18 is feasable.

Thanks, Yeah they are polished Audi A8 wheels.

A couple of mine from a few months ago

Hi do you have any close up pics of this? also what profile are the 215's? I am currently running the standard 225/40's on my 8j.

Weitec coilovers, wound to the bottom on the front and oe rubber mount on the rear springs instead of the adjuster cups.

The same 15m spacer. Maybe buy 10mm and use them all year round then.

Just wondering what was the max et and width of wheels people are running? I have seen people running the standard wheels with 15mm spacers which is what i am planning to do over winter. My question is would i be able to run the spacers on my summer wheels which are 18x8 et48 i believe?

On a related matter which clay bars would you recommend? I have only ever had experiance of the megs kit and as i have ran out i thought i would try something new. I have been sold on the dodo juice for lube especially as the concentrate works out well in terms of value for money.

I run polished wheels with no lacquer, but they do need to be kept on top of as they do start to cloud up after a while.

Thanks for the input, I have put a couple of coats of FK hi temp sealant on them for now as it seems the best fitting protective product in my kit. Is there any point in specific wheel sealants? If so you have any good experiences of any that you would recommend. Cheers Billy

Wheels and finish in question. Tried the next stuff but didnt seem to get a mirror finish still seemed a little hazy in places