PlutoWRC

ABS sensor is located to the bearing seats. When using the pad will not change the distance between the sensor and the ring.

Neck tank I did the following: I made the case for cap On the neck I put PVC reducer (get in the store with plumbing stuff) Case I planted into the fender to the reduction and ensure laminate On the inside, I was properly glued laminated Then I cut off case Here is the connection to original neck.

Super. When I look at your work, I see myself ... When are the times when I was doing my Fabia ... I keep my fingers crossed that everything went well ... Here I send motivation:

Some photos as I made ??the back door, there are ... http://www.lutovsky..../090117_164.htm and here: http://www.lutovsky..../090328_216.htm

I removed the original panel and instead I put new ... Here some photos: http://www.lutovsky..../080906_034.jpg http://www.lutovsky..../081017_086.jpg

Here is a brace under the window:

The rear struts are done. They are not original ... Stretching under the rear window is from the Motorsport Kopecký. Or could be find here: http://www.tomuli.cz...produkty/?id=26 P.S. Feel free to ask, I advise ...

It will certainly be ... Then establishes a thread and share with the building ...

Adjust the rear wheel arch was not very complicated, the process is clearly seen from the photos. The chassis is then reduced by 60mm. P.S. Sorry for my English, I use Google Translator :-)

Yes, Vlastimil is a good deal and a good man Yet another video from my first rally:

Here's two videos of amateur races:

Some news: New rear brakes. Calipers from Octavia I RS. 312 mm discs ... The new helmet for racing in car design: And carpet with logo CTR Kopecky:

Pads 50 mm wheels enough. Mounting fenders and wings can be made to the original holders. Something needs to be adjusted, but it's little things. Here in the gallery you can see enough detail from the reconstruction ...

Body kit costs about 25.000 CZK

The wing can be ordered here: +420722930831