lil_azza

I have a 55plate fabia vrs that iv replaced consol bushes checked engine mounts/gearbox etc etc etc has 312mm brakes done about 15thou on them and now theres a horrible clunk that happens when i brake then reverse and brake like somthings lose but cant find it?? I feel it through the pedal :/ that leads me to think its brake related, anyone had this? Cheers

I know it defiantly needs the boost pipe jpints sorting was going to do that and a service this week cheers guys

The car does about 15 a day and about 50/150 at weekends my partner through the weekdays drives at a slower speed i at weekends drive her quite enthusiastically within reason, service is well overdue i think last done about 20thou ago :/

Sorry forgot to say its a 05 vrs

Hi guys recently my car has started to smoke alot when i get in turbo under heavy acceleration, if i just slowly get the car into turbo it dosent smoke, isit turbo seals? Or just me needing to actually service it? Cheers

Ah kool cheers how random

Isit a bird? Superman? A creature from a cave?

Pmd

Youd need to get a map to suit the decat

basically iv got a baxi combi 105e its got on the left a switch heating and hot water,a off,and a just hot water switch, on the right its got a timer and in the middle its got a on, off and timer setting. if the boiler is set to heating and hot water but heating off on timer switch, i can run hot water upstaires and i get hot water and heating activates for the length of time the tap is on, if i want hot water downstaires iv got to manually turn heating on :S if i put the switch to just hot water i still dont get hot water down staires unless i put heating on, but up is ok as should be, its doing my head in whats wrong? diverter switch? or have i just got a freeking dog fart boiler that needs burning as its costing loads of gas as iv got to turn heating on off etc just to wash dishes etc :@ cheers aaron

Your welcome to borrow my engine support bar if ur local bud im yeovil, are u gonna be removing or clutch/flywheel? If so make sure uv got the correct size spline, and multi socket, also a few lever bars is a must

I went into my local powerflow dealer in yeovil, they wouldnt doit! Would be too loud and went to say hed done it before, wouldnt listen to a word i said, typical ass i think

Bilstein have always seemed a very good make in my books,

Yes done it only 2 weeks ago in the snow!! Yes its a ballache and yes undo rear subframe leave steering rack on tho as it moves enough, its seriously heavy and tight tho so be careful, I used a engine brace to enable me to lower and raise the engine, as this is needed to remove and fit box good luck

Could try cleaning them, pikey mr muscle oven cleaner only costs a few quid and as said above dosent really sound like the vaines would make that sorta noise