Jump to content

fat bloke

Members
  • Posts

    57
  • Joined

  • Last visited

Everything posted by fat bloke

  1. hi got superb 2.0 bss engine i have engine light on with the code p0473 to high im led to beleave the exhaust gas pressor sensor need changing were do i find this and any one got a photo of it fanks
  2. ive just had a injector fitted by a freind and now it wont start ive got a superb 56 plate with that **** bss engine do the injectors have to be coded and if so how do u do it fanks
  3. It's doing this all the time should I take it for a long run I don't have any light on the dash board to say its re gen
  4. Hi right then here goes when I start engine it sits about 850 revs tick over when I drive of and stop then tick over it seem to stick at 1000 revs any ideas people !!
  5. right then as ive got a supurb mk1 with a bss engine and yes we will say no more about that thanks # as a taxi driver which one should i purchase then ????
  6. Hi I need to take the steering wheel off coz itts not in right position if I disconect the battery first will I have to reset the airbag alarm when I turn on ignition
  7. Hi I don't no much about these but I now don't have reversing lights or reversing sensor they have stopped working is there a fuse any suggestion fanks
  8. No it don't nor does the radio controls on it either
  9. high please help my steering wheel had to be removed air bag light wont go off error code says 00588 airbag ignighter,driver side(n95) resistance too high can anyone help anyone no what this means URGENT THANKS
  10. just a quick question does this sensor just pull out or unscrew or do u have to twist it in a certain position fanks
  11. hi when removing the master cylinder there is a pipe at the back 0f it does this get disconnected from the engine bay by the brake servo is it the one with the retaining clip on thanks
  12. ive undone the single bolt were the bracket is and 2 bolts at the bottom is there anything else coz i can not get it to budge help please
  13. [email protected]. Is there anything behind the clutch cylinder as in the engine bay holding it fanks
  14. Hi what have I not done I'm taking out the clutch master cylinder I've undone the 2bolts and the bolt at the top of the bracket so 3bolts intotal but it still won't budge what am I not done please help thanks
  15. lmao i had the same changed the oil pump the pump was £130.00 i found the hexegon shaft rounded of and my turbo went as well got a recon for £295.00 got a independent garage to fit it it aint that hard if u got the right tools i spent the day and watch him
  16. bewarned fella is it a bss engine coz ive got one of them and my oil pump went and had to have the engine rebuilt and a turbo as well i couldent aford to get rid of it apart from that its a good car but if u can aford it get that oil pump changed NOW mine went at 160.000 miles and yes you do need the dpf fluid topped up every 80.000 miles
  17. Anyone out there work for Skoda I need some tech info I have a superb elegance 2.0 BSs engine it has had a new clutch but not Skoda original and its rubbed and put hole in bell housing can anyone tell me what the depth of the pressure plate and clutch is when bolted together we have 33 mm just wondering if this clutch what is supplyed is wrong HELP
  18. right had new clutch fitted ive check and it is the correct one but as you can see its puta hole in housing is there a wrong way to fit the fly wheel there is a gap about 5mm behind it when fitted
  19. here is picture can you bolt fly wheel on wrong i have a gap about 5mm behind it
  20. hi had new clutch fitted with is the right one and look what has happened straight away any ideas guys photo inclosed
  21. right then i have a leak on the gearbox someware any ideas i have check gearbox oil and there aint any got a superb 56 plate elegance HELP WERE DO I START
  22. fanks mate i was told by skoda that i could not fit a 1.9
  23. having had engine failure ive just had crank ground the balance shaft was just unbolted is there a certain position it has to go back and how do i no its in the right position i have a 56plate supurb 140bhp bss engine and yes i no i should have scrapped it
  24. yer thats right dud it takes about 3 to 4 ltr at about £35.00 a ltr you have to top it up every 80.000 miles mate
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.